Can the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 handle 40 l/min at 280 bar and +150Â°C without insulation failure?

Yes. The Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 with handle supports the specified parameters: inlet GZ 1/4" BSP, outlet GW 1/4" NPT, working pressure up to 280 bar, flow rate 40 l/min and operating temperature up to +150Â°C. Because the product is described as an MT3 type thermal insulated lance designed for high-pressure washer and lists those exact limits, it is rated to handle 40 l/min at 280 bar and +150Â°C without insulation failure when used within those stated specifications. Ensure proper installation, avoid pressure/temperature spikes above the rated limits, and follow manufacturer maintenance and safety instructions to maintain insulation integrity.

Is the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 compatible with NPT outlet accessories at 280 bar?

Yes. Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 is compatible with NPT outlet accessories at 280 bar. The lance has an outlet specified as GW 1/4" NPT and a working pressure up to 280 bar, so NPT-threaded accessories rated for 1/4" NPT and for 280 bar (or higher) can be safely used. Ensure mating fittings/seals are rated for the temperature (up to +150Â°C) and flow (40 l/min) and use appropriate thread sealant or adapters as needed.

Does the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 meet IP or corrosion resistance ratings for 150Â°C use?

Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT3 does not provide any IP (Ingress Protection) rating or specific corrosion-resistance classification in the given description. The data supplied. thermal insulated design, connections (inlet GZ 1/4" BSP / outlet GW 1/4" NPT), working pressure up to 280 bar, flow rate 40 l/min, operating temperature up to +150Â°C, material: galvanized steel. indicates only material and temperature/pressure limits. Galvanized steel offers basic corrosion protection (zinc coating) suitable for many applications, but its performance depends on coating quality, environment (e.g., fresh water, saltwater, chemicals), and exposure duration. No specific corrosion resistance standard (e.g., ISO, ASTM, or salt spray hours) or IP enclosure rating for dust/water ingress is stated, so you cannot assume compliance with any IPx or defined corrosion class for 150Â°C use. If you need verified IP protection or certified corrosion resistance at 150Â°C, request from the manufacturer: test reports or certificates (IP rating, salt spray/neutral salt spray (NSS)/ISO 9227, corrosion class per ISO 12944, material data at 150Â°C) and details on the zinc coatingâs temperature limits. Also confirm seals/insulation components are rated for continuous operation at +150Â°C.

Lance for a high-pressure washer, inlet 1/4″ BSP male, steel galvanized, type MT3

All products, Guns for high-pressure washers/

Additional information

A lance with thermal insulation, type MT3, intended for a high-pressure washer. Connection: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-120366	Lance MT3 700 mm, galvanized steel	-	280	In stock	Enquiry
MH-120371	Lance MT3 900 mm, galvanized steel	-	280	In stock	Enquiry
MH-120380	Lance MT3 1200 mm, galvanized steel	-	280	In stock	Enquiry
MH-120386	Lance MT3 1500 mm, galvanized steel	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A lance with thermal insulation, type MT3, intended for a high-pressure washer. Connection: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.