Is the Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 compatible with standard BSP and metric hose fittings under high-pressure conditions?

Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 is designed for highâpressure hydraulic systems and is compatible with standard BSP and metric hose fittings when used as intended. The adapter features external BSP threads with a 60Â° cone sealing and internal metric threads with a 60Â° cone sealing, plus a swivel nut, which ensures proper mechanical fit and sealed joints between BSP and metric components. Made of carbon steel and galvanized, it provides suitable strength and corrosion resistance for typical hydraulic pressures. Compatibility under high pressure depends on matching thread types, sizes, and cone seat angles, plus ensuring both connected components are rated for the same system pressure. When BSP and metric fittings are of the correct sizes and both use 60Â° cone sealing surfaces, the A605 will provide a proper, pressureâtight connection. Always verify pressure ratings, thread tolerances, and application specifics (fluid type, temperature, dynamic loads) and follow manufacturer installation and torque recommendations to ensure safe operation.

Can the Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 withstand pressures and temperatures typical for mobile hydraulic systems?

Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 is intended for hydraulic power systems and for connecting hoses, pipes and components. Made of carbon steel and galvanized, with 60Â° cone sealing on both BSP external and metric internal threads and a swivel nut, it is suitable for typical mobile hydraulic applications in terms of mechanical design and sealing method. However, the description does not specify exact maximum working pressure or temperature range. To confirm suitability for a specific mobile system, check the adapterâs rated working pressure (MPa/bar) and temperature limits from the manufacturer or datasheet and ensure compatibility with your hydraulic fluid, dynamic loads and safety factors.

Does the Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 require specific installation torque or sealing practices?

Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605 does require correct installation practices to ensure leak-free and safe operation. Sealing practice: - Both BSP external threads and metric internal threads use 60Â° cone metal-to-metal sealing. Do not use tape or pipe dope on the cone sealing faces; the metal cone must seat directly against the mating cone to form the seal. - Apply thread sealant only on the straight (non-sealing) portions of threads if needed for additional protection against corrosion or external leakage, but avoid contaminating the cone faces. - Ensure mating components have undamaged, clean 60Â° cone seats and correct thread types (BSP male cone and metric female cone). Torque practice: - Use the manufacturerâs recommended torque values if available. If not provided, tighten to a controlled torque appropriate for the adapter size and material to achieve proper cone seating without overstressing threads. - Typical practice: hand-tighten the swivel nut, then tighten with a wrench until the cone seats, then apply an additional controlled fraction of a turn (commonly 1/6 to 1/4 turn) or increase torque incrementally while monitoring for proper seating. Exact turns/torques vary with size and thread pitchâdo not overtighten. - Use calibrated tools and, for high-pressure systems, consider hydraulic pressure testing after assembly. Other installation notes: - Use the swivel nut to orient the hose/pipe before final tightening; avoid rotating the entire assembly once seated. - Clean threads and sealing surfaces; remove burrs and debris. - Follow system pressure ratings and compatibility (carbon steel, galvanized) and retighten after initial pressure cycling if recommended by supplier. If available, always follow the specific torque/sealing instructions from the adapter or system manufacturer for Hydraulic adapter - reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605.

Hydraulic adapter – reduction GZ BSP x GW METRIC with swivel nut, carbon steel, type A605

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adaptor with external BSP threads (60° cone sealing) and internal metric threads (60° cone sealing), with a swivel nut. Used in hydraulic power systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction in type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A605-06-14	Adapter GZ BSP 3/8" / GW M14x1.5	-	400	In stock	Enquiry
TI-A605-06-16	Adapter GZ BSP 3/8" / GW M16x1.5	-	400	In stock	Enquiry
TI-A605-06-18	Adapter GZ BSP 3/8" / GW M18x1.5	-	400	In stock	Enquiry
TI-A605-08-18	Adaptor GZ BSP 1/2" / GW M18x1.5	-	350	In stock	Enquiry
TI-A605-08-22	Adaptor GZ BSP 1/2" / GW M22x1.5	-	350	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure adaptor with external BSP threads (60° cone sealing) and internal metric threads (60° cone sealing), with a swivel nut. Used in hydraulic power systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction in type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.