Can the DKOR 45Â° hydraulic end, type ZBW320, carbon steel, zinc-nickel be used with hoses requiring a 60Â° cone O-ring seal and crimping sleeves?

Yes. The DKOR 45Â° hydraulic end, type ZBW320, carbon steel, zinc-nickel is designed to seal with an O-ring on a 60Â° cone (DKOR) and is specifically intended for crimping into hydraulic and industrial hoses using a compatible crimping sleeve. Its internal BSP thread and nut configuration, 45Â° angle, and stated compatibility with crimping sleeves suitable for the hose type make it appropriate for use with hoses requiring a 60Â° cone O-ring seal and crimping sleeves. Ensure you select the correct sleeve and crimping specifications matched to your hose diameter and material.

Does the DKOR 45Â° hydraulic end, type ZBW320, carbon steel, zinc-nickel require a specific crimp sleeve profile?

Yes. the DKOR 45Â° hydraulic end, type ZBW320, carbon steel, zinc-nickel requires a crimp sleeve with a profile and internal diameter matched to the specific hose construction. The product description states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type," which means: - Use a sleeve profile specified by the hose manufacturer (e.g., single-wire, spiral, textile) so the sleeve compresses correctly onto the hose reinforcement. - Choose the sleeve inner diameter and length corresponding to the hose outer diameter and the insertion depth for the ZBW320 fitting. - Ensure the sleeve material and strength are compatible with hydraulic crimping standards and the hoseâs working pressure. - Verify crimping specifications (crimp diameter, crimping force, and die set) recommended for the hose/fitting combination. In short: DKOR 45Â° hydraulic end, type ZBW320, carbon steel, zinc-nickel must be crimped with a sleeve profile and dimensions appropriate to the hose type and per the hose/fitting manufacturerâs crimping guidelines.

DKOR 45° hydraulic end, type ZBW320, carbon steel, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW320-04-04-CN	End. 45° GW 1/4" BSP, hose 1/4", cone 60°, o-ring, Zn-Ni	6	-	In stock	Enquiry
TI-ZBW320-06-06-CN	End fitting 45° GW 3/8" BSP, hose 3/8", cone 60°, o-ring, Zn-Ni	10	-	In stock	Enquiry
TI-ZBW320-08-08-CN	End fitting 45° GW 1/2" BSP, hose 1/2", cone 60°, o-ring, Zn-Ni	12	-	In stock	Enquiry
TI-ZBW320-10-10-CN	End fitting 45° GW 5/8" BSP, hose 5/8", cone 60°, O-ring, Zn-Ni	16	-	In stock	Enquiry
TI-ZBW320-12-12-CN	End fitting 45° GW 3/4" BSP, hose 3/4", cone 60°, o-ring, Zn-Ni	20	-	In stock	Enquiry
TI-ZBW320-16-16-CN	End. 45° GW 1" BSP, hose 1", cone 60°, o-ring, Zn-Ni	25	-	In stock	Enquiry
TI-ZBW320-20-16-CN	End fitting 45° GW 1.1/4" BSP, hose 1", cone 60°, o-ring, Zn-Ni	25	-	In stock	Enquiry
TI-ZBW320-20-20-CN	End 45° GW 1.1/4" BSP, hose 1.1/4", cone 60°, o-ring, Zn-Ni	32	-	In stock	Enquiry
TI-ZBW320-24-20-CN	End fitting 45° GW 1.1/2" BSP, hose 1.1/4", cone 60°, o-ring, Zn-Ni	32	-	In stock	Enquiry
TI-ZBW320-24-24-CN	End fitting 45° GW 1.1/2" BSP, hose 1.1/2", cone 60°, o-ring, Zn-Ni	38	-	In stock	Enquiry
TI-ZBW320-32-24-CN	End fitting 45° GW 2" BSP, hose 1.1/2", cone 60°, o-ring, Zn-Ni	38	-	In stock	Enquiry
TI-ZBW320-32-32-CN	End fitting 45° GW 2" BSP, hose 2", cone 60°, o-ring, Zn-Ni	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.