Is the DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel compatible with standard BSP-threaded hoses and crimping sleeves for industrial hydraulic applications?

Yes. The DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel is compatible with standard BSP-threaded hoses and crimping sleeves used in industrial hydraulic applications, given the description: it features an internal BSP thread and nut and a 60Â° sealing cone (DKR) . meaning it matches BSP-equipped hose assemblies that use a 60Â° cone seat. It is specifically designed for crimping into hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type, so using a correctly sized crimp sleeve and following the hose manufacturerâs crimp specifications will ensure a proper, pressure-rated connection. Also, construction in AISI 316L stainless steel provides enhanced corrosion resistance for demanding environments. Ensure thread size, cone seat standard (60Â°), hose type, and sleeve dimensions are all matched to the fitting and crimping machine specifications before assembly.

Can DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel withstand corrosive seawater environments when crimped onto industrial hydraulic hoses?

Yes. DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel is suitable for corrosive seawater environments when properly crimped onto industrial hydraulic hoses. AISI 316L is a lowâcarbon stainless steel with molybdenum, offering excellent resistance to chloride pitting and crevice corrosion typical of seawater. Proper sealing (60Â° DKR cone) and correct crimping with a compatible sleeve and hose type are essential to avoid crevice formation, galvanic couples, or mechanical stress that could compromise corrosion resistance. For longâterm use in seawater, ensure the hose, crimp sleeve, and any mating components are also seawaterâcompatible, avoid dissimilar metals that cause galvanic corrosion, and follow manufacturer crimping and maintenance recommendations.

Does DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel meet pressure ratings for standard hydraulic systems?

Possibly. but you cannot assume DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel automatically meets the pressure ratings for a given standard hydraulic system without additional specification and testing. Why: The product description (Standard hydraulic end fitting type Z, internal BSP thread and nut, sealing cone 60Â° (DKR), angled 45Â°, designed for crimping with a suitable sleeve, material AISI 316L) defines geometry, thread type, sealing form and material, but it does not state a working pressure (maximum operating pressure), burst pressure, or the hose assembly pressure rating after crimping. Standard hydraulic systems and applications require fittings and hose assemblies rated for specific pressures (e.g., 210 bar, 350 bar, 420 bar or higher), and ratings depend on: - Fitting design and wall thickness - Size (BSP thread and hose bore) - Material properties (AISI 316L has good corrosion resistance but lower strength than some stainless steels) - Crimp sleeve type and crimping procedure - Hose manufacturer compatibility and rated working pressure - Assembly testing (burst/impulse tests) and applicable standards (e.g., ISO 8434, EN 853/EN 857, SAE J516, or manufacturer specs) What you need to confirm compliance: 1. Manufacturerâs specified working pressure and burst pressure for ZBW310 in the exact size you intend to use. 2. Compatibility and rated pressure of the hose and crimp sleeve specified for that fitting. 3. Certification or test reports showing assemblies made with ZBW310 meet relevant standards (e.g., ISO/EN/SAE) and required safety factors. 4. Installation/crimping parameters and tooling to ensure correct assembly. Conclusion: DKR 45Â° hydraulic end, type ZBW310, AISI 316L steel may be suitable if the manufacturer provides explicit pressure ratings and assembly/test documentation proving compliance with the pressure class of your hydraulic system. Without those documents, you cannot assume it meets standard hydraulic system pressure ratings.

DKR 45° hydraulic end, type ZBW310, AISI 316L steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW310-04-03-SS	End. 45° GW 1/4" BSP, hose 3/16", cone 60°, AISI 316L	5	450	In stock	Enquiry
TI-ZBW310-04-04-SS	End fitting 45° GW 1/4" BSP, hose 1/4", cone 60°, AISI 316L	6	450	In stock	Enquiry
TI-ZBW310-06-04-SS	End fitting 45° GW 3/8" BSP, hose 1/4", cone 60°, AISI 316L	6	445	In stock	Enquiry
TI-ZBW310-06-05-SS	End. 45° GW 3/8" BSP, hose 5/16", cone 60°, AISI 316L	8	445	In stock	Enquiry
TI-ZBW310-06-06-SS	End fitting 45° GW 3/8" BSP, hose 3/8", cone 60°, AISI 316L	10	445	In stock	Enquiry
TI-ZBW310-08-06-SS	End. 45° GW 1/2" BSP, hose 3/8", cone 60°, AISI 316L	10	415	In stock	Enquiry
TI-ZBW310-08-08-SS	End fitting 45° GW 1/2" BSP, hose 1/2", cone 60°, AISI 316L	12	415	In stock	Enquiry
TI-ZBW310-10-10-SS	End fitting 45° GW 5/8" BSP, hose 5/8", cone 60°, AISI 316L	16	350	In stock	Enquiry
TI-ZBW310-12-10-SS	End. 45° GW 3/4" BSP, hose 5/8", cone 60°, AISI 316L	16	350	In stock	Enquiry
TI-ZBW310-12-12-SS	End fitting 45° GW 3/4" BSP, hose 3/4", cone 60°, AISI 316L	20	350	In stock	Enquiry
TI-ZBW310-16-12-SS	End. 45° GW 1" BSP, hose 3/4", cone 60°, AISI 316L	20	280	In stock	Enquiry
TI-ZBW310-16-16-SS	End fitting 45° GW 1" BSP, hose 1", cone 60°, AISI 316L	25	280	In stock	Enquiry
TI-ZBW310-20-20-SS	End fitting 45° GW 1.1/4" BSP, hose 1.1/4", cone 60°, AISI 316L	32	210	In stock	Enquiry
TI-ZBW310-24-24-SS	End fitting 45° GW 1.1/2" BSP, hose 1.1/2", cone 60°, AISI 316L	38	185	In stock	Enquiry
TI-ZBW310-32-32-SS	End fitting 45° GW 2" BSP, hose 2", cone 60°, AISI 316L	50	175	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.