Is the IBC plug with male thread, polypropylene compatible with all DIN EN 12713 trapezoidal external threaded IBC container ports and safe up to 7 bar at -10Â°C to +70Â°C?

Yes. The IBC plug with male thread, polypropylene is compliant with DIN EN 12713 and described as fully compatible with trapezoidal external threads used by various IBC manufacturers, so it will fit standard DIN EN 12713 threaded IBC ports. Its material (polypropylene) and specified ratings indicate it is safe for use up to 7 bar within the operating temperature range of â10Â°C to +70Â°C (with temporary use up to +80Â°C). Ensure you verify the specific containerâs conformity to DIN EN 12713 and inspect the plug and seal for damage before use; for prolonged exposure near the upper temperature or pressure limits, consult the manufacturer for duty-cycle or chemical-compatibility guidance.

Can the IBC plug with male thread, polypropylene withstand temporary exposure to +80Â°C while maintaining compatibility with DIN EN 12713 ports?

Yes. The IBC plug with male thread, polypropylene is designed for normal operation from -10Â°C to +70Â°C and is specified as tolerant of temporary exposure up to +80Â°C. Because it is a trapezoidal external threaded plug compliant with DIN EN 12713 and fully compatible with IBC container threads from various manufacturers, brief exposure to +80Â°C should maintain compatibility with DIN EN 12713 ports. Ensure exposure is truly temporary and avoid prolonged or repeated highâtemperature cycling to prevent material softening or seal degradation.

Does the IBC plug with male thread, polypropylene meet DIN EN 12713 tolerance limits across different manufacturers?

Yes. based on the provided description, the IBC plug with male thread, polypropylene is designed to meet DIN EN 12713 tolerance limits and be fully compatible with IBC container threads from various manufacturers. Why: DIN EN 12713 specifies dimensional tolerances and thread form for trapezoidal external threaded plugs used on IBCs. The product description explicitly states it is a "Trapezoidal external threaded plug compliant with DIN EN 12713 standard, fully compatible with the threads in IBC containers from various manufacturers." That wording indicates the manufacturer claims conformity to the standardâs tolerances and thread geometry, meaning it should fit and seal correctly across different IBC brands whose fittings are made to the same standard. Other relevant points: - Material: polypropylene is commonly used and acceptable for many IBC plug applications; it will have the dimensional stability and chemical resistance expected within the specified working conditions. - Operating limits: Working pressure up to 7 bar and temperature range â10Â°C to +70Â°C (temporarily up to +80Â°C) are provided; compatibility in service also depends on staying within these limits to avoid deformation that could affect fit and seal. Caveats: Conformity claims depend on quality control and actual production tolerances. For critical applications, verify by: - Requesting a conformity certificate or dimensional inspection report. - Testing a sample on the specific IBC brand and serial batch in use. - Ensuring chemical and temperature exposure remain within the stated limits. Conclusion: The description indicates that the IBC plug with male thread, polypropylene is intended to meet DIN EN 12713 tolerance limits across different manufacturers, but practical verification (certificates or fit testing) is recommended for assurance in critical uses.

IBC plug with male thread, polypropylene

Additional information

Material	P – material (plastic)

Trapezoidal external threaded plug compliant with DIN EN 12713 standard, fully compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AC-IBM-D060	IBC plug with GZ S60x6	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Trapezoidal external threaded plug compliant with DIN EN 12713 standard, fully compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).