What is the correct outer diameter of the Metric tube insert, stainless steel, M760LI to ensure it matches my pneumatic hose flange?

To ensure compatibility, the correct outer diameter of the Metric tube insert, stainless steel, M760LI must equal the outer diameter of your pneumatic hose at the flange contact point. The insertâs flange is designed to match metric hose outer diameters; therefore measure the hoseâs outer diameter and select the M760LI whose flange OD corresponds exactly to that measurement. If your hose OD is not specified, measure with calipers across the outermost points and use that value as the required flange OD for the Metric tube insert, stainless steel, M760LI.

Does the Metric tube insert, stainless steel, M760LI come in different flange outer diameters to match various pneumatic hose sizes?

Yes. The Metric tube insert, stainless steel, M760LI is intended for pneumatic hoses with metric diameters and requires the insert flange outer diameter to match the hoseâs outer diameter. That implies it is supplied in flange outer diameters corresponding to the range of metric hose sizes so the flange can correctly fit each hose. Material: AISI 316 stainless steel.

How do I verify the outer diameter of the Metric tube insert, stainless steel, M760LI matches my hose flange?

To verify the outer diameter of the Metric tube insert, stainless steel, M760LI matches your hose flange, follow these steps: 1. Identify the flange OD requirement: Check your hose specification or measure the outer diameter (OD) of the hose flange where the insert will seat. Measure at the widest external point of the flange using a caliper. 2. Measure the insert flange OD: Using a caliper, measure the outer diameter of the flange on the Metric tube insert, stainless steel, M760LI. Measure across the widest external points of the insert flange. 3. Compare measurements: The outer diameter of the insert flange must equal the outer diameter of the hose flange. If both ODs match (within typical manufacturing tolerances, e.g., Â±0.1â0.2 mm unless otherwise specified), the fit is correct. 4. Check material and fit: Since the Metric tube insert, stainless steel, M760LI is AISI 316, verify the stainless steel flange will properly seat against your hose materialâlook for no gaps and uniform contact around the circumference. 5. Final fit test: Install the Metric tube insert, stainless steel, M760LI into the hose and visually inspect and feel for a flush, even connection. If possible, perform a pressure or leak test appropriate for your pneumatic system. If measurements differ, do not installâthe flange ODs must match to ensure a proper seal and safe pneumatic operation.

Metric tube insert, stainless steel, M760LI

All products, LET-LOK precision connectors/

Additional information

Material	SS – stainless steel

Insert used for pneumatic hoses with metric diameters. The outer diameter of the insert flange must match the outer diameter of the hose. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HM-LM760LI-06-04-SS	6 mm x 4 mm hose insert, SS	-	-	In stock	Enquiry
HM-LM760LI-08-06-SS	8 mm x 6 mm hose insert, SS	-	-	In stock	Enquiry
HM-LM760LI-10-08-SS	10 mm x 8 mm hose insert, SS	-	-	In stock	Enquiry
HM-LM760LI-12-08-SS	12 mm x 8 mm hose insert, SS	-	-	In stock	Enquiry
HM-LM760LI-12-10-SS	12 mm x 10 mm hose insert, SS	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Insert used for pneumatic hoses with metric diameters. The outer diameter of the insert flange must match the outer diameter of the hose. Material: AISI 316 steel.