Is ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB compatible with other ISO-B quick couplings from different manufacturers?

Yes. ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB is designed to the ISO-B standard and, per the product description, can be used interchangeably with ISO-B quick couplings from other manufacturers. Compatibility depends on matching the ISO-B dimensional and performance specifications (thread type.internal BSP, sealing material viton, size), and operating limits (temperature range â20Â°C to +200Â°C, working pressure up to 250 bar depending on size). As long as the mating coupling conforms to the ISO-B standard and falls within these pressure, temperature and size parameters, the plug should be compatible. Ensure the specific size and pressure rating of both components match before use.

Can the ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB be used with fluids containing aggressive chemicals at 150Â°C and 200 bar?

Yes. The ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB is suitable for use with aggressive chemicals at 150Â°C and 200 bar, provided the chemical is compatible with AISI 316 stainless steel and Viton seals. The productâs rated operating temperature range (â20Â°C to +200Â°C) and working pressure (up to 250 bar, depending on size) cover 150Â°C and 200 bar, and the design offers double shut-off to minimize fluid loss. Verify compatibility of the specific chemical with AISI 316 and Viton (some highly halogenated or aromatic chemicals may attack Viton) and confirm the exact coupling size variant supports 200 bar.

Does ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB require specific torque for installation?

ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB does not specify a required torque for installation in the provided description. The information given covers thread type (internal BSP), materials (AISI 316 steel, Viton sealing), operating temperature (-20Â°C to +200Â°C), working pressure (up to 250 bar depending on size), safety factor (4:1) and intended use, but contains no torque values. Recommendation: follow general best practices for BSP threaded connections and manufacturer or site-specific guidance: - Use a suitable sealant or tape if required for the mating BSP thread per installation standards. - Hand-start the coupling, then tighten with a wrench using moderate, controlled torqueâavoid over-tightening to prevent thread damage or distortion of sealing surfaces. - If available, consult DRAGONâs technical datasheet or contact the manufacturer/supplier for exact torque specifications for the specific size of the coupling. - After installation, pressure-test the connection at working pressure or per local procedure to verify leak-tightness.

ISO-B GW BSP quick connect plug with valve, AISI 316 steel, DRAGON, type IB

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel

ISO-B quick coupling plug with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a socket, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DG-IB06-M-04G-SS	DRAGON ISO-B DN6 plug with 1/4" BSP female thread, 250 bar, AISI 316	-	250	In stock	Enquiry
DG-IB10-M-06G-SS	DRAGON ISO-B DN10 plug with 3/8" BSP female thread, 200 bar, AISI 316	-	200	In stock	Enquiry
DG-IB12-M-08G-SS	DRAGON ISO-B DN12 plug with 1/2" BSP thread, 200 bar, AISI 316	-	200	In stock	Enquiry
DG-IB19-M-12G-SS	DRAGON ISO-B DN19 plug with 3/4" BSP female thread, 160 bar, AISI 316	-	160	In stock	Enquiry
DG-IB25-M-16G-SS	DRAGON ISO-B DN25 plug with 1" BSP female thread, 125 bar, AISI 316	-	125	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ISO-B quick coupling plug with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a socket, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.