Is the ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB compatible with other manufacturers' ISO-B couplings and interchangeable under pressure?

Yes. The ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB is compatible with ISO-B couplings from other manufacturers and is designed to be interchangeable under pressure. It is a double-shutoff socket supplied with a plug to minimize fluid loss during connection/disconnection in high-pressure industrial systems (water, fuels, oils, gases, chemicals). Constructed from AISI 316 with Viton seals, it operates from â20Â°C to +200Â°C and supports working pressures up to 250 bar (size-dependent) with a 4:1 safety factor; flow rates are specified for a 3 bar pressure drop.

Can the ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB be used for combustible fluids like diesel or gasoline?

Yes. The ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB is specified for use with fuels and oils and is constructed from AISI 316 stainless steel with Viton seals, an operating temperature range of -20Â°C to +200Â°C, and working pressures up to 250 bar. These materials and ratings are compatible with combustible fluids such as diesel and gasoline. Ensure correct size/pressure rating for your application, verify chemical compatibility for any additives, and follow appropriate safety, grounding, and leak-prevention procedures when handling flammable fuels.

Can the ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB be cleaned with common industrial solvents without damaging seals?

ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB uses Viton seals and AISI 316 stainless steel body. Viton (FKM) is broadly resistant to many industrial solvents, oils, fuels and chemicals and is rated for the stated operating range (-20 Â°C to +200 Â°C). However compatibility depends on the specific solvent, its concentration, temperature and exposure time. Strong polar solvents (e.g., ketones like acetone, certain esters), some amines, low-molecular-weight ketones and hot aggressive acids/alkalis can swell, harden or degrade Viton. Alcohols, mineral oils, hydrocarbons and many hydraulic fluids are generally compatible. Conclusion: ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB can be cleaned with many common industrial solvents without damaging the seals, provided the chosen solvent is Viton-compatible and cleaning is done within the specified temperature limits. For any aggressive solvent, prolonged exposure, high temperature or unknown mixtures, verify chemical compatibility with Viton (FKM) or consult the solvent manufacturer or seal supplier before cleaning.

ISO-B GW BSP quick-connect socket with valve, AISI 316 steel, DRAGON, type IB

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel

ISO-B quick coupling socket with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a plug, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DG-IB06-F-04G-SS	DRAGON ISO-B DN6 socket with 1/4" BSP female thread, 250 bar, AISI 316	-	250	In stock	Enquiry
DG-IB10-F-06G-SS	DRAGON ISO-B DN10 socket with 3/8" BSP female thread, 200 bar, AISI 316	-	200	In stock	Enquiry
DG-IB12-F-08G-SS	DRAGON ISO-B DN12 socket with 1/2" BSP female thread, 200 bar, AISI 316	-	200	In stock	Enquiry
DG-IB19-F-12G-SS	DRAGON ISO-B DN19 socket with 3/4" BSP female thread, 160 bar, AISI 316	-	160	In stock	Enquiry
DG-IB25-F-16G-SS	DRAGON ISO-B DN25 socket with 1" BSP thread, 125 bar, AISI 316	-	125	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ISO-B quick coupling socket with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a plug, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.