Can the ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 be used with Viton seals at -25Â°C to +200Â°C and 300 bar working pressure?

Yes . ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 can be used with Viton seals at -25Â°C to +200Â°C and 300 bar, provided the following are met: - Seals: Viton is listed as an available sealing material and its temperature compatibility matches the stated range (-25Â°C to +200Â°C). - Pressure: Working pressure is specified up to 300 bar (depending on size); ensure the selected PLT1 size supports 300 bar. - Application: Designed for hydraulic oil and construction machinery, compatible with your hydraulic power use. - Safety: Manufacturer specifies a 4:1 safety factor; confirm system design and transient spikes remain within limits. - Other considerations: Verify material compatibility of carbon steel and galvanizing with your fluid and environment, check assembly torque/sealing practices, and confirm the socketâs anti-disconnection pin and one-hand operation meet operational requirements. If you need a definite go/no-go, provide the exact PLT1 size and operating duty (pressure spikes, fluid type, and exposure) so compatibility with 300 bar can be confirmed.

Is the ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 compatible with NBR and Viton seals for construction machinery use?

Yes. The ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 is compatible with both NBR and Viton seals for construction machinery use. The product description lists Sealing: NBR, Viton and an operating temperature range from -25Â°C to +200Â°C depending on seal type, is designed for hydraulic oil, built for construction machinery, and rated up to 300 bar (size-dependent), so either seal can be used according to your required temperature and chemical-resistance needs (NBR for general hydraulic oil up to moderate temperatures; Viton for higher temperatures and better chemical resistance).

Does the ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 include an anti-disconnection pin on the socket?

Yes. The ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1 includes an anti-disconnection pin on the socket to prevent accidental uncoupling.

ISO-F hydraulic quick connector plug with BSP GW in carbon steel, type PLT1

All products, Hydraulic quick couplings/

Additional information

Material	CS – steel (cast iron)

Non-drip “flat-face” ISO-F quick coupling with shut-off valve and internal BSP thread. Application: hydraulic power (hydraulic oil). Designed primarily for construction machinery. The socket features a pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR, Viton. Operating temperature: from -25°C to +200°C, depending on the type of sealing. Working pressure: up to 300 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DP-PLT1-0606003	DN6 plug with 1/4" BSP female thread, nitrile seal, with valve	-	300	In stock	Enquiry
DP-PLT1-1310003	DN10 plug with 3/8" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-1313003	DN10 plug with 1/2" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-2013003	DN12 plug with 1/2" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-2019003	DN12 plug with 3/4" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-2519003	DN19 plug with 3/4" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-2525003	DN19 plug with 1" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-2525003-V	DN19 plug with 1" BSP female thread, viton seal, with valve	-	250	In stock	Enquiry
DP-PLT1-3031003	DN25 plug with 1.1/4" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry
DP-PLT1-3031003-V	DN25 plug with 1.1/4" BSP female thread, viton seal, with valve	-	250	In stock	Enquiry
DP-PLT1-3939003	DN40 plug with 1.1/2" BSP female thread, nitrile seal, with valve	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Non-drip “flat-face” ISO-F quick coupling with shut-off valve and internal BSP thread. Application: hydraulic power (hydraulic oil). Designed primarily for construction machinery. The socket features a pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR, Viton. Operating temperature: from -25°C to +200°C, depending on the type of sealing. Working pressure: up to 300 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.