Is the BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel compatible with standard crimping sleeves for hose Type Z?

Yes. The BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel is compatible with standard crimping sleeves for hose Type Z. The product description explicitly states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose," and its Type Z configuration ("standard hydraulic end with a regular hydraulic 'tail' for hose") matches the hose Type Z sleeve geometry. Additionally, AISI 304 steel construction does not prevent crimping with standard sleeves. Ensure you select the correct sleeve size and crimping parameters (mandrel, hydraulic pressure, and crimp profile) specified for your hose Type Z and ZMB600 dimensions to achieve a proper, leak-free crimp.

Can BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel be used with hoses that require specific banjo bolt torque values?

Yes - the BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel can be used with hoses that require banjo bolt torque values, provided two conditions are met: 1) the banjo fitting geometry (bolt hole diameter, flange seating surfaces and thickness) matches the hose/banjo bolt specification, and 2) the assembly is tightened to the hose manufacturerâs specified banjo bolt torque using a calibrated torque wrench. AISI 304 construction is compatible with typical hydraulic systems but verify corrosion and pressure ratings for your fluid and operating conditions. Always follow the hose makerâs torque, sealing (gasket/crush washer) and crimp sleeve specifications and perform pressure testing after assembly.

Does BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel require specific hose crimping pressure settings?

Does BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel require specific hose crimping pressure settings? Yes. Although the description states the BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose," proper crimping pressure (or crimp dimension/force) is determined primarily by the hose manufacturer and the specific sleeve used, not by the fitting material alone. Therefore: - You must follow the hose manufacturerâs recommended crimping pressure/profile and the crimp sleeve manufacturerâs specifications for the hose size and construction. - Use the correct sleeve type and die set for the hoseâs inner diameter, reinforcement (e.g., single-wire, spiral, textile), and nominal size. - Confirm the recommended crimping parameters (force, die gap, and crimp diameter) from the hose/sleeve technical data sheet; stainless AISI 304 fittings do not change those values but require proper alignment and tooling to avoid damage. - Perform a pull test and pressure test after crimping per applicable standards or supplier instructions to verify the assembly. In summary: BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel does not have a unique crimping pressure specified in the fitting descriptionâuse the hose and sleeve manufacturersâ specified crimping pressures and procedures, and validate assemblies with appropriate testing.

BANJO metric RNM hydraulic end, type ZMB600, AISI 304 steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TI-ZMB600-14-06-SS304	End. BANJO M14, hose 3/8", AISI 304	10	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.