Can BEL 90Â° metric tube end, type ZMR211, light series, carbon steel be crimped using standard crimping sleeves for hydraulic hoses?

Yes. The BEL 90Â° metric tube end, type ZMR211, light series, carbon steel can be crimped using standard crimping sleeves intended for hydraulic hoses, provided the sleeve is compatible with the hose type and size. The fitting is specifically designed for crimping in hydraulic and industrial hoses (type Z with a regular hydraulic tail), with metric tube connection and cutting-ring (BEL) sealing. Ensure you use the correct sleeve profile and crimping parameters recommended for the hose construction (e.g., single-braid, spiral, or textile reinforcement) and follow manufacturer specifications for crimp diameter, press force, and tooling to achieve a reliable, leak-free joint. Also verify material compatibility and corrosion protection needs given the galvanized carbon steel construction.

Is BEL 90Â° metric tube end, type ZMR211, light series, carbon steel compatible with cutting-ring (BEL) sealing during standard hose crimping?

Yes. BEL 90Â° metric tube end, type ZMR211, light series, carbon steel is compatible with cutting-ring (BEL) sealing during standard hose crimping. Description specifies metric tube with cutting-ring (BEL) sealing, a regular Z-type hydraulic tail, and design for crimping in hydraulic/industrial hoses using a crimping sleeve appropriate for the hose. Material (carbon steel, galvanized) and light 90Â° configuration do not prevent use with a BEL cutting ring when crimped with the correct sleeve and machine for the hose type. Ensure you match tube OD, cutting-ring size, sleeve profile and crimping parameters to the hose specification.

Does BEL 90Â° metric tube end, type ZMR211, light series, carbon steel require specific crimping sleeve dimensions?

BEL 90Â° metric tube end, type ZMR211, light series, carbon steel requires a crimping sleeve that matches the hose type and dimensions. the fitting itself is designed for crimping in hydraulic and industrial hoses using an appropriate sleeve. There are no universal sleeve dimensions provided in the brief description: you must use a crimping sleeve sized to the specific hose inner/outer diameter and construction (e.g., single-wire, multi-wire, textile), compatible with the light-series ZMR211 geometry and rated for hydraulic pressures involved. Material compatibility (steel, galvanized) is standard, but select a sleeve and crimp profile recommended by the hose manufacturer or the fitting supplier for BEL cutting-ring (BEL) style metric tube ends at 90Â°. If you lack supplier guidance, provide the hose type and dimensions so the correct sleeve inner/outer diameter, length, and crimp specification can be determined.

BEL 90° metric tube end, type ZMR211, light series, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), 90° angled light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions	Catalogue
TI-ZMR211-06-02	End fitting 90° tubular 6 mm, hose 1/8", lightweight	3	-	In stock	Enquiry
TI-ZMR211-06-025	End fitting 90° tubular 6 mm, hose 5/32", lightweight	4	-	In stock	Enquiry
TI-ZMR211-06-03	End fitting 90° tubular 6 mm, hose 3/16", lightweight	5	-	In stock	Enquiry
TI-ZMR211-06-04	End fitting 90° tubular 6 mm, hose 1/4", lightweight	6	-	In stock	Enquiry
TI-ZMR211-08-03	End fitting 90° tubular 8 mm, hose 3/16", lightweight	5	-	In stock	Enquiry	-
TI-ZMR211-08-04	End fitting 90° tubular 8 mm, hose 1/4", lightweight	6	-	In stock	Enquiry
TI-ZMR211-08-05	End fitting 90° tubular 8 mm, hose 5/16", lightweight	8	-	In stock	Enquiry
TI-ZMR211-10-05	End fitting 90° tubular 10 mm, hose 5/16", lightweight	8	-	In stock	Enquiry
TI-ZMR211-10-06	End fitting 90° tubular 10 mm, hose 3/8", lightweight	10	-	In stock	Enquiry
TI-ZMR211-12-06	End fitting 90° tubular 12 mm, hose 3/8", lightweight	10	-	In stock	Enquiry
TI-ZMR211-12-08	End fitting 90° tubular 12 mm, hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZMR211-15-06	End fitting 90° tubular 15 mm, hose 3/8", lightweight	10	-	In stock	Enquiry
TI-ZMR211-15-08	End fitting 90° tubular 15 mm, hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZMR211-18-08	End fitting 90° tubular 18 mm, hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZMR211-18-10	End fitting 90° tubular 18 mm, hose 5/8", lightweight	16	-	In stock	Enquiry
TI-ZMR211-22-08	End fitting 90° tubular 22 mm, hose 1/2", lightweight	12	-	In stock	Enquiry
TI-ZMR211-22-10	End fitting 90° tubular 22 mm, hose 5/8", lightweight	16	-	In stock	Enquiry
TI-ZMR211-22-12	End fitting 90° tubular 22 mm, hose 3/4", lightweight	20	-	In stock	Enquiry
TI-ZMR211-28-16	End fitting 90° tubular 28 mm, hose 1", lightweight	25	-	In stock	Enquiry
TI-ZMR211-35-16	End fitting 90° tubular 35 mm, hose 1", lightweight	25	-	In stock	Enquiry
TI-ZMR211-35-20	End fitting 90° tubular 35 mm, hose 1.1/4", lightweight	32	-	In stock	Enquiry
TI-ZMR211-42-24	End fitting 90° tubular 42 mm, hose 1.1/2", lightweight	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), 90° angled light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.