Is MPX 20 W light chemical hose safe for use with water-based epoxy and polyurethane dispersion paints, and which chemicals should be avoided?

Yes . MPX 20 W light chemical hose is safe for use with water-based epoxy and polyurethane dispersion paints. Its inner layer of EPDM and construction are intended for water, paints, light chemicals, and air, and the product description specifically states it can be used with those water-based systems. Chemicals and substances to avoid: - Cellulose paints and lacquer thinner-type systems - Chlorinated rubber products - Any formulations containing aromatic solvents (e.g., toluene, xylene) - Gasoline, oils, fuels, and aromatic hydrocarbons in general Additional notes: - For aggressive chemical applications not listed here, contact Tubes International for confirmation. - Conductive inner and outer layers (R < 10^5 Î©/m) and EPDM outer layer resistant to ozone and weathering. - Working pressure 20 bar; temperature range â40 Â°C to +95 Â°C.

Can MPX 20 W light chemical hose be used with compressed air and light chemicals, and what temperature range does it support?

Yes. MPX 20 W light chemical hose can be used with compressed air and with light chemicals (including water-based epoxy and polyurethane dispersion paints). It must not be used with cellulose paints, chlorinated rubber, aromatic solvents (toluene, xylene), gasoline, oils, fuels or aromatic hydrocarbons. Operating temperature range: -40Â°C to +95Â°C. Working pressure: 20 bar. For specific chemical compatibility, contact Tubes International.

Does MPX 20 W light chemical hose have conductive layers to prevent static buildup during use?

Yes. MPX 20 W light chemical hose has conductive inner and outer layers (resistance R < 10^5 Î©/m) to prevent static buildup during use. The inner and outer layers are black EPDM rubber; the outer layer is also resistant to ozone, aging, and weather. For specific chemical applications or further safety confirmation, contact Tubes International.

MPX 20 W light chemical hose

Q: Can MPX 20 W light chemical hose be used with compressed air and light chemicals, and what temperature range does it support?

Yes. MPX 20 W light chemical hose can be used with compressed air and with light chemicals (including water-based epoxy and polyurethane dispersion paints). It must not be used with cellulose paints, chlorinated rubber, aromatic solvents (toluene, xylene), gasoline, oils, fuels or aromatic hydrocarbons. Operating temperature range: -40Â°C to +95Â°C. Working pressure: 20 bar. For specific chemical compatibility, contact Tubes International.

Q: Does MPX 20 W light chemical hose have conductive layers to prevent static buildup during use?

Yes. MPX 20 W light chemical hose has conductive inner and outer layers (resistance R < 10^5 Î©/m) to prevent static buildup during use. The inner and outer layers are black EPDM rubber; the outer layer is also resistant to ozone, aging, and weather. For specific chemical applications or further safety confirmation, contact Tubes International.

All products, General purpose hoses/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	95
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	50
Reinforcement	2 polyester braids

Strong and flexible rubber pressure hose, intended for water, paints, light chemicals, and air. Can be used for water-based epoxy and polyurethane dispersion paints. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents such as toluene, xylene, or gasoline, as well as for oils, fuels, and aromatic hydrocarbons. For chemical applications, we recommend contacting Tubes International. Conductive inner and outer layer (R<10⁵ Ω/m), outer layer resistant to ozone, aging, and weather conditions. Inner layer: black EPDM rubber. Reinforcement: polyester braid (DN6 ÷ DN25), 2 polyester braids (DN32 ÷ DN38). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
PR-MPX20-06W	MPX-W hose 20 bar 6x13 mm	6	20
PR-MPX20-08W	MPX-W hose 20 bar 8x15 mm	8	20
PR-MPX20-10W	MPX-W hose 20 bar 10x17 mm	10	20
PR-MPX20-13W	MPX-W hose 20 bar 13x21 mm	12	20
PR-MPX20-16W	MPX-W hose 20 bar 16x24 mm	16	20
PR-MPX20-19W	MPX-W hose 20 bar 19x28 mm	20	20
PR-MPX20-25W	MPX-W hose 20 bar 25x35 mm	25	20
PR-MPX20-32W	MPX-W hose 20 bar 32x44 mm	32	20
PR-MPX20-38W	MPX-W hose 20 bar 38x53 mm	38	20

Strong and flexible rubber pressure hose, intended for water, paints, light chemicals, and air. Can be used for water-based epoxy and polyurethane dispersion paints. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents such as toluene, xylene, or gasoline, as well as for oils, fuels, and aromatic hydrocarbons. For chemical applications, we recommend contacting Tubes International. Conductive inner and outer layer (R<10⁵ Ω/m), outer layer resistant to ozone, aging, and weather conditions. Inner layer: black EPDM rubber. Reinforcement: polyester braid (DN6 ÷ DN25), 2 polyester braids (DN32 ÷ DN38). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	95
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	50
Reinforcement	2 polyester braids