Does the Muffler MWSFE with GZ, brass reduce noise by about 30 dB at 5 bar, 1 m distance, 90Â°?

Yes. Muffler MWSFE with GZ, brass typically reduces noise by about 30 dB when installed in compressed air systems at 5 bar, measured at 1 m distance and 90Â° from the silencer axis. The quoted average 30 dB attenuation depends on the specific size of the silencer but is consistent with the provided specifications (material: nickel-plated brass / nickel-plated sintered bronze; operating temp: -10Â°C to +80Â°C; max working pressure: 12 bar).

Can Muffler MWSFE with GZ, brass be used at temperatures from -10Â°C to +80Â°C without performance loss?

Yes. Muffler MWSFE with GZ, brass is specified for an operating temperature range of -10Â°C to +80Â°C and a working pressure up to 12 bar. Within -10Â°C to +80Â°C it will operate without loss of performance as long as installation and system conditions (pressure â¤12 bar, compatible media, and avoidance of mechanical damage or clogging) are met.

Is Muffler MWSFE with GZ, brass compatible with 12 bar system pressure?

Yes. Muffler MWSFE with GZ, brass is compatible with a 12 bar system pressure. The product specification lists Working pressure: 12 bar, and materials (nickel-plated brass, nickel-plated sintered bronze) and operating temperature (-10Â°C to +80Â°C) are consistent with typical compressed air system use. Note: noise reduction figure (approx. 30 dB at 5 bar, 1 m, 90Â°) is measured at 5 bar and may differ at higher pressures.

Muffler MWSFE with GZ, brass

All products, Equipment for pneumatic valves/

Additional information

Material	B – brass (bronze)

MWSFE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 90° (to avoid direct flow) from the axis of the silencer, averages 30 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0970530051	MW SFE silencer, nickel-plated brass/stainless steel, GZ M5	-	-	In stock	Enquiry
MW-W0970530052	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 1/8"	-	-	In stock	Enquiry
MW-W0970530053	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 1/4	-	-	In stock	Enquiry
MW-W0970530054	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 3/8	-	-	In stock	Enquiry
MW-W0970530055	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 1/2	-	-	In stock	Enquiry
MW-W0970530056	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 3/4	-	-	In stock	Enquiry
MW-W0970530057	MW SFE silencer, nickel-plated brass/stainless steel, GZ BSP 1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

MWSFE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 90° (to avoid direct flow) from the axis of the silencer, averages 30 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.