Can Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET be used on dynamically bent hoses?

No. Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET should not be used on dynamically bent hoses. The product description explicitly states the tape should not be used for dynamically bent hoses. It is intended for wrapping finished hoses and installations without disconnection, sealing hose ends and irregular shapes, and as a substitute for PYROJACKET, but its construction and recommended installation (30â50% overlap, secured with PYROSIL tape or stainless steel clamps) are for static or infrequently moved applications. Using it on hoses that undergo continuous flexing could lead to premature wear, loss of protection, or failure.

Can Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET withstand repeated exposure to molten metal splashes without bonding to the jacket?

Yes. Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET is designed to resist splashes of molten metal and explicitly âdoes not adhere to the cover,â so it will withstand repeated exposure without bonding to the jacket. Its silicone-coated fiberglass construction and specified temperature performance (continuous â54Â°C to +260Â°C, short spikes up to +1093Â°C for 15â20 minutes and up to +1650Â°C for 15â30 seconds) support protection against liquid metal splashes. For best results, install with 30â50% overlap and secure with PYROSIL tape or stainless steel clamps; do not use on dynamically bent hoses.

Is Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET suitable for sealing irregularly shaped hose ends?

Yes. Non-adhesive silicone-coated fiberglass thermal tape PYROJACKET is suitable for sealing irregularly shaped hose ends. The product description explicitly lists sealing the ends of hoses and irregularly shaped objects as an intended use. Key points for proper application: - Use the tape with a 30â50% overlap during wrapping to ensure continuous coverage and thermal protection. - Secure the wrapped area with PYROSIL tape or stainless steel clamps to hold the non-adhesive tape in place. - Do not use PYROJACKET on dynamically bent hoses (it is not suitable for applications with frequent flexing). - The tape resists splashes of liquid metal (it does not adhere to the cover), flame, moisture, and abrasion, providing robust protection for irregular shapes. - Nominal thickness: 3.73 mm; material: fiberglass coated with silicone (rusty color). - Operating temperature range: â54Â°C to +260Â°C (short-term resistance: up to +1093Â°C for 15â20 minutes; up to +1650Â°C for 15â30 seconds). Follow overlap and securing recommendations for best sealing performance.

Non-adhesive tape thermal with fiber glass coated silicone PYROJACKET

All products, Covers/

Additional information

Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-54
Standard length [m]	11, 30

Non-adhesive tape PYROTAPE intended is for wrapping ready lines and installations without ich disconnecting, in replacement cover PYROJACKET, a also for jej sealing na ends lines and objects o irregular shapes. resistant na splashes molten metal (nie adhere for cover), flame, moisture and abrasion. wall thickness nominal tape to 3.73 mm. at mounting recommended is overlap 30-50% and use tape PYROSIL or straps of stainless steel. tape nie should be used for lines dynamically bent. Material: fiber glass coated silicone in color rust. Operating temperature: from -54°C to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FQ-PT-025	Band PYRO-TAPE 25 mm	-	-	In stock	Enquiry
FQ-PT-050	Band PYRO-TAPE 50 mm	-	-	In stock	Enquiry
FQ-PT-075	Band PYRO-TAPE 76 mm	-	-	In stock	Enquiry
FQ-PT-100	Band PYRO-TAPE 102 mm	-	-	In stock	Enquiry
FQ-PT-125	Band PYRO-TAPE 127 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Non-adhesive tape PYROTAPE intended is for wrapping ready lines and installations without ich disconnecting, in replacement cover PYROJACKET, a also for jej sealing na ends lines and objects o irregular shapes. resistant na splashes molten metal (nie adhere for cover), flame, moisture and abrasion. wall thickness nominal tape to 3.73 mm. at mounting recommended is overlap 30-50% and use tape PYROSIL or straps of stainless steel. tape nie should be used for lines dynamically bent. Material: fiber glass coated silicone in color rust. Operating temperature: from -54°C to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).