Is the DIN73378 nylon air hose, PA6 suitable for both pneumatic and chemical applications across the full -10Â°C to +80Â°C temperature range?

Yes . the DIN73378 nylon air hose, PA6 is designed for a wide range of applications including pneumatic, hydraulic, oil, fuel, lubrication and chemical installations and is rated for operation from -10Â°C to +80Â°C. Its polyamide (PA6) construction delivers a lightweight, flexible hose with calibrated outer diameter and working pressures between 11 and 40 bar (depending on diameter), making it suitable for pneumatic systems across that full temperature range. Caveats: chemical compatibility depends on the specific chemicals, concentrations and exposure conditions. While PA6 offers good resistance to many oils, fuels and common chemicals, it can be attacked by strong acids, bases, certain solvents (e.g. some chlorinated hydrocarbons) and prolonged exposure to aggressive chemicals or fuels at temperature extremes. For critical chemical applications, verify compatibility with the chemical manufacturerâs data or perform a compatibility check for the exact fluid, concentration, temperature and pressure conditions. In summary: DIN73378 nylon air hose, PA6 is suitable for pneumatic and many oil/fuel/chemical uses across -10Â°C to +80Â°C, but confirm chemical compatibility for specific aggressive fluids before use.

Can the DIN73378 nylon air hose, PA6 handle petroleum-based oils and fuels without degradation over time?

DIN73378 nylon air hose, PA6 is designed for pneumatic, hydraulic, oil, fuel, lubrication and chemical use, but PA6 (polyamide 6) has limited longâterm resistance to many petroleumâbased oils and fuels. Shortâterm contact and intermittent exposure at ambient temperatures (â10Â°C to +80Â°C operating range) is usually tolerated, and the hose can handle pressures per its spec (11â40 bar depending on diameter). However, prolonged or continuous exposure to certain hydrocarbons, especially aromatic hydrocarbons, biofuels, or fuels with additives, can cause swelling, hardening, loss of mechanical properties and accelerated ageing of PA6 over time. For continuous fuel service or critical installations, choose a hose specifically rated for petroleum fuels (e.g., hoses with elastomers like FKM/fluoroelastomer or PA variants certified for fuels) or consult the manufacturer for fuel compatibility and expected service life.

Does the DIN73378 nylon air hose, PA6 resist common industrial solvents and chemicals used in lubrication systems?

Yes. the DIN73378 nylon air hose, PA6 offers good resistance to many common industrial solvents and chemicals used in lubrication systems, but with important limits. Why: Polyamide 6 (PA6, nylon) has generally good mechanical strength, abrasion resistance and resistance to aliphatic hydrocarbons, oils, greases and many hydraulic fluids, which makes it suitable for pneumatic, hydraulic, oil, fuel, lubrication and some chemical applications per its DIN 73378 designation. Its rated operating temperature (-10Â°C to +80Â°C) and working pressure range (11â40 bar depending on diameter) also align with typical lubrication-system conditions. Limitations and cautions: - PA6 is attacked or swollen by strong acids, strong bases, some chlorinated hydrocarbons (e.g., methylene chloride), ketones (e.g., acetone), and certain aggressive solvents. Continuous exposure to these can degrade mechanical properties and lead to leaks or failure. - Aromatic hydrocarbons and some specialty solvents can also reduce material life. - Elevated temperatures near the 80Â°C limit or repeated thermal cycles accelerate chemical degradation. - Compatibility depends on concentration, temperature, pressure, exposure duration and dynamic vs. static use. Recommendation: For critical applications, consult the hose manufacturerâs detailed chemical-compatibility chart or provide the exact fluids (names, concentrations, temperatures, pressures) so compatibility can be verified. If exposure to aggressive solvents is expected, consider hoses specifically formulated for chemical resistance or alternative materials (e.g., PTFE-lined, fluoropolymers, or specific elastomers).

Hose pneumatic nylon DIN73378, PA6

All products, Pneumatic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-10
Vacuum resistance	check
Standard length [m]	100, 50

A light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SH-PA6-04X02	Hose nylonowy PA6 4x2 mm	2	40	In stock	Enquiry
SH-PA6-06X04	Hose nylonowy PA6 6x4 mm	4	25	In stock	Enquiry
SH-PA6-08X06	Hose nylonowy PA6 8x6 mm	6	18	In stock	Enquiry
SH-PA6-10X08	Hose nylonowy PA6 10x8 mm	8	14	In stock	Enquiry
SH-PA6-12X08	Hose nylonowy PA6 12x8 mm	8	25	In stock	Enquiry
SH-PA6-12X10	Hose nylonowy PA6 12x10 mm	10	11	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.