Can the Pressure washer gun with GW 1/4" BSP outlet, SG40 handle both hot and cold water up to 160Â°C while operating safely at working pressure of 350 bar?

Yes. Pressure washer gun with GW 1/4" BSP outlet, SG40 is specified for both hot and cold water and has an operating temperature rating up to +160Â°C. Its working pressure rating is up to 350 bar (maximum 400 bar), and it supports a flow rate up to 30 l/min. Built with a high-strength plastic housing and a lever mechanism designed for comfortable operation, it can safely handle hot water up to 160Â°C while operating at the stated working pressure of 350 bar, provided installation and use follow manufacturer guidelines and system components (hoses, seals, fittings) are also rated for those temperatures and pressures.

Is the Pressure washer gun with GW 1/4" BSP outlet, SG40 suitable for continuous use at flow rates up to 30 l/min without valve wear?

Based on the provided description, the Pressure washer gun with GW 1/4" BSP outlet, SG40 is rated for a flow rate of 30 l/min and working pressures up to 350 bar (max 400 bar), and is specified for industrial hot and cold water use up to +160Â°C. The spec confirms it is designed to handle 30 l/min, but it does not explicitly state durability under continuous operation or mention materials and design details of the internal valve that would determine wear resistance over prolonged continuous use. Therefore: the SG40 is suitable for service at 30 l/min by specification, but whether it will avoid valve wear under continuous long-term operation cannot be guaranteed from the provided description alone; consult manufacturer guidance or endurance test data for continuous-duty validation.

Does the Pressure washer gun with GW 1/4" BSP outlet, SG40 feature a safety lock for high-pressure use?

Pressure washer gun with GW 1/4" BSP outlet, SG40 does not explicitly state the presence of a dedicated safety lock for high-pressure use in the provided description. The description highlights a lever mechanism that requires little force for comfortable operation, a 1/4" BSP internal thread outlet, high-strength plastic housing, and working/maximum pressures (up to 350 bar working, 400 bar max), but it does not mention a safety lock feature. Based on that information alone, you should assume no specific safety lock is confirmed; if a safety lock is required for your application, verify with the manufacturer or vendor before use.

Gun for washer pressure with outlet 1/4″ BSP female, SG40

All products, Guns for high-pressure washers/

Additional information

The high-pressure SG40 water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. The outlet part is terminated with a female 1/4″ BSP thread. Housing material: high-strength plastic. Working pressure: up to 350 bar. pressure The permissible: 400 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-100345	Gun SG40, inlet 3/8" BSP female	-	350	In stock	0 zł		Enquiry
MH-100408	Gun SG40, inlet 3/8" BSP male	-	350	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The high-pressure SG40 water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. The outlet part is terminated with a female 1/4″ BSP thread. Housing material: high-strength plastic. Working pressure: up to 350 bar. pressure The permissible: 400 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.