Is the Quick-connect plug for injection molds with hose end without valve, DYROS series 6 compatible with standard 1/2" garden hoses and fittings?

Quick-connect plug for injection molds with hose end without valve, DYROS series 6 is designed for cooling liquids, compressed air, gas cylinders and similar technical uses, made of brass and rated to 15 bar. Compatibility with standard 1/2" garden hoses and fittings depends on the hose end dimensions and thread type of the DYROS series 6 plug. If the hose end is the common 1/2" (nominal) garden hose thread (GHT / BSP or 3/4â³ GHT depending on region) or if the internal diameter matches a 1/2â³ hose barb, it can be connected directly or with a short hose piece. However, garden hoses typically use 3/4â³ GHT (thread) in many countries, not a 1/2â³ BSP thread; mismatched thread standards or barb sizes will require an adapter or a hose section with the correct inner diameter to clamp onto the DYROS hose end. Also confirm pressure rating of the garden hose and fittings (15 bar is high for typical garden hoses) and ensure compatible sealing (washer/thread type) to avoid leaks. In summary: it may be compatible if the DYROS series 6 hose end matches the garden hose thread/barb standard in your region or if you use an appropriate adapter; otherwise an adapter or different hose section is needed.

Can the Quick-connect plug for injection molds with hose end without valve, DYROS series 6 be used with compressed air systems at 15 bar?

Yes. The Quick-connect plug for injection molds with hose end without valve, DYROS series 6 is specified for a working pressure of 15 bar and is designed for compressed air installations. Made of brass and intended for cooling liquids, compressed air, gas cylinder applications and other technical fields, it can be used with compressed air systems operating at 15 bar. Ensure proper hose and system compatibility, correct assembly and routine inspection for safe operation.

Quick-connect plug for injection molds with hose end without valve, DYROS series 6

Additional information

Material	B – brass (bronze)

DYROS series 6 quick coupling plug with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N624	DN 6 plug with 1/4" hose end, without valve	6	15	In stock	Enquiry
DY-N625	DN 6 plug with end for 5/16" hose, without valve	8	15	In stock	Enquiry
DY-N626	DN 6 plug with end for 3/8" hose, without valve	10	15	In stock	Enquiry
DY-N628	DN 6 plug with 1/2" hose end, without valve	12	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 6 quick coupling plug with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.