Is the Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3 compatible with deionized water and safe at -40Â°C to +82Â°C and up to 8.3 bar?

Yes. The Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3 is compatible with deionized water and rated safe for use from -40Â°C to +82Â°C and up to 8.3 bar. Material: acetal; sealing: NBR Oâring; working pressure and temperature range match those specifications, and the product description explicitly lists deionized water applications.

Can the Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3 be used in washdown and leak detection systems with NBR sealing?

Yes - the Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3 is suitable for washdown and leak detection systems when using NBR sealing, with these caveats: NBR o-ring compatibility is good for water and many common cleaning agents; the acetal body resists mechanical stress and water exposure. Performance limits: working pressure up to 8.3 bar and operating temperature range â40Â°C to +82Â°C. Avoid strong oxidizers, high-temperature steam, or aggressive solvents that can degrade NBR or acetal. For ultrapure or aggressive chemical applications, consider alternative elastomers or materials.

Does the Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3 resist chemical cleaners used in washdown systems?

Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3: short answer. limited resistance; not guaranteed for aggressive chemical cleaners. Explanation: - Body material is acetal (POM). Acetal offers good mechanical strength, low moisture absorption and good resistance to many oils, fuels and some detergents, but is susceptible to attack by strong oxidizers, concentrated acids and certain chlorinated solvents and bleaches commonly used in intensive washdown cleaners. - Sealing is NBR (nitrile) Oâring. NBR resists oils, greases and many aqueous solutions, but has only moderate resistance to ketones, esters, strong acids/alkalis, and oxidizing agents; it can swell, harden or degrade with prolonged exposure to aggressive cleaners (e.g., highâconcentration caustics, hypochlorite, peroxide at elevated temps). - Operating limits: up to 8.3 bar and â40Â°C to +82Â°C. Chemical attack risk increases with higher temperature and prolonged contactânear the upper temperature limit, both acetal and NBR performance against chemicals worsens. Practical guidance: - For mild, neutral detergents and standard washdown cleaning solutions at typical concentrations and temperatures, the part will generally perform acceptably. - For aggressive cleaners (strong alkalis, highâstrength bleaches, concentrated solvents, oxidizers) or highâtemperature/longâdwell cleaning, compatibility is doubtful; consider alternative materials (e.g., PTFE, PVDF, EPDM or FKM seals) or consult chemical compatibility charts and supplier testing. - When in doubt, run a compatibility test under actual concentration, temperature and exposure time or contact the manufacturer for validated chemical resistance data.

Quick-connect plug with hose nut, with valve, acetal, PLC series DN 6.3

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)
Standard length [m]	15

Medium-sized quick coupling plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] – total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CC-PLV-32-AC	PLC plug DN6.4 for hose 6.4x4.3 with nut, with valve, acetal	4	8.3	In stock	Enquiry
CC-PLV-33-AC	PLC connector DN6.4 for hose 8x6 with nut, with valve, acetal	6	8.3	In stock	Enquiry
CC-PLV-34-AC	PLC connector DN6.4 for hose 9.5x6.4 with nut, with valve, acetal	6	8.3	In stock	Enquiry
CC-PLV-35-AC	PLC connector DN6.4 for hose 10x8 with nut, with valve, acetal	8	8.3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Medium-sized quick coupling plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] – total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.