Elbow silicone 180° reinforced polyester, E180, blue
Elbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Elbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
Additional information
| Material | VMQ – silicone |
|---|---|
| Maximum operating temperature [°C] | 180 |
| Minimum operating temperature [°C] | -50 |
| Vacuum resistance | no |
