Can the FSS swivel flange end for steam hose to EN 14423, stainless steel, be used with both PN40 and ASME 300 flange classes at 210Â°C and 18 bar?

Yes . the FSS swivel flange end for steam hose to EN 14423, stainless steel can be used with both PN40 and ASME 300 flange classes at 210Â°C and 18 bar, with conditions: - The product is specified for saturated steam at 18 bar (+210Â°C). - Its flange face is manufactured to European (EN 10092-1) and American (ASA/ASME) standards and is offered in PN40 / PN16 and ASA (ASME) 150 and 300 classes, so mechanical compatibility with PN40 and ASME 300 is provided. - Use is allowed only if the working pressure of the chosen flange class at 210Â°C meets or exceeds 18 bar; PN40 and ASME 300 both have sufficient pressure ratings at that temperature. - Assembly must follow correct installation: corrugated tail and lock fitted with appropriate shell clamps for steam hoses (EN 14423, DIN 2826), using compatible materials (AISI 316 stainless steel / galvanized steel) and proper bolting/gasket for the flange class. - For any application specifics or if operating near limits, confirm selection and compatibility with Tubes International. In summary: acceptable for PN40 and ASME 300 at 210Â°C/18 bar provided the flange class rating at that temperature is respected and installation follows standards.

Can FSS swivel flange end for steam hose to EN 14423, stainless steel, be used with both PN40 and ASME 300 at 210Â°C and 18 bar?

Yes. The FSS swivel flange end for steam hose to EN 14423, stainless steel can be used with both PN40 and ASME 300 at 210Â°C and 18 bar provided the flange class rating at that temperature supports 18 bar. The product is built for saturated steam (working pressure listed as 18 bar at +210Â°C) and the flanges are supplied to EN PN16/PN40 and ASME 150/300 ratings; ensure you select the PN40 or ASME 300 flange version and verify the flange pressureâtemperature chart for AISI 316 at 210Â°C confirms the required 18 bar. Also confirm correct hose, clamps and installation per EN 14423/DIN 2826 for steam service.

Can the FSS swivel flange end for steam hose to EN 14423, stainless steel, be used with PN16, PN40 and ASME 150/300 at 210Â°C?

Yes. the FSS swivel flange end for steam hose to EN 14423, stainless steel can be used with PN16, PN40 and ASME 150/300 at 210Â°C, with these conditions and limits: - The product is designed for steam application (EN 14423, DIN 2826) and available with flanges manufactured to EN 1092-1 (PN16, PN40) and ASA/ASME (150, 300). - Material AISI 316 stainless steel is suitable for saturated steam at 210Â°C. - The datasheet specifies a working pressure of 18 bar at +210Â°C for saturated steam for the hose assembly; additionally the assembly must comply with the working pressure of the selected flange class at this temperature. In practice this means you must ensure the chosen flange rating (PN16, PN40, ASME 150 or 300) provides equal or higher permissible pressure at 210Â°C than the application requires. - For other media or nonâsteam uses, use the working pressure applicable to the flange class and verify material compatibility. - Proper assembly (shell clamps, corrugated tail, locking) and correct matching of hose and flange classes are mandatory. Follow Tubes International selection guidance and applicable standards for pressure/temperature ratings and joint integrity. Conclusion: Acceptable for use with PN16, PN40 and ASME 150/300 at 210Â°C provided the flange class pressure rating at 210Â°C meets or exceeds the application pressure and correct installation and compatibility checks are performed.

FSS swivel flange end for steam hose to EN 14423, stainless steel

All products, Steam hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	15, 2

FSS end with a rotating flange, for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (EN 14423, DIN 2826, sizes 1/2” to 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American standards ASA (ASME) 150 PSI and 300 PSI. Material: stainless steel AISI 316, galvanized steel. Working pressure: 18 bar (+210°C) for saturated steam and according to the working pressure of the respective flange class at this temperature; for other applications according to the working pressure for the respective flange class (e.g., PN40) – selection in contact with Tubes International.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RS-FSA2-015-013-SS	FSS end with rotary coupling ASA 1/2", hose 1/2", AISI 316	12	18	In stock	Enquiry
RS-FSA2-020-019-SS	FSS end with rotary coupling ASA 3/4", hose 3/4", AISI 316	20	18	In stock	Enquiry
RS-FSA2-025-025-SS	FSS end with rotary coupling ASA 1", hose 1", AISI 316	25	18	In stock	Enquiry
RS-FSA2-032-032-SS	FSS end with rotary coupling ASA 1.1/4", hose 1.1/4", AISI 316	32	18	In stock	Enquiry
RS-FSA2-040-038-SS	FSS end with rotary coupling ASA 1.1/2", hose 1.1/2", AISI 316	38	18	In stock	Enquiry
RS-FSA2-050-050-SS	FSS end with rotary coupling ASA 2", hose 2", AISI 316	50	18	In stock	Enquiry
RS-FSA4-015-013-SS	FSS end with rotary coupling ASA 300 1/2", hose 1/2", AISI 316	12	18	In stock	Enquiry
RS-FSA4-020-019-SS	FSS end with rotary coupling ASA 300 3/4", hose 3/4", AISI 316	20	18	In stock	Enquiry
RS-FSA4-025-025-SS	FSS end with rotary collar ASA 300 1", hose 1", AISI 316	25	18	In stock	Enquiry
RS-FSA4-032-032-SS	FSS end with rotary coupling ASA 300 1.1/4", hose 1.1/4", AISI 316	32	18	In stock	Enquiry
RS-FSA4-040-038-SS	FSS end with rotary coupling ASA 300 1.1/2", hose 1.1/2", AISI 316	38	18	In stock	Enquiry
RS-FSA4-050-050-SS	FSS end with rotary coupling ASA 300 2", hose 2", AISI 316	50	18	In stock	Enquiry
RS-FSS2-015-013-SS	FSS end with rotary coupling DN15 PN40, hose 1/2", AISI 316	12	18	In stock	Enquiry
RS-FSS2-015-013-SST	FSS end with rotary coupling DN15 PN40, hose 1/2", AISI 316 / zinc-coated steel flange.	12	18	In stock	Enquiry
RS-FSS2-020-019-SS	FSS end with rotary coupling DN20 PN40, hose 3/4", AISI 316	20	18	In stock	Enquiry
RS-FSS2-020-019-SST	FSS end with rotary coupling DN20 PN40, hose 3/4", AISI 316 / zinc-coated steel flange.	20	18	In stock	Enquiry
RS-FSS2-025-013-SS	FSS end with rotary coupling DN25 PN40, hose 1/2", AISI 316	12	18	In stock	Enquiry
RS-FSS2-025-019-SS	FSS end with rotary coupling DN25 PN40, hose 3/4", AISI 316	20	18	In stock	Enquiry
RS-FSS2-025-019-SST	FSS end with rotary coupling DN25 PN40, hose 3/4", AISI 316 / zinc-coated steel flange.	20	18	In stock	Enquiry
RS-FSS2-025-025-SS	FSS end with rotary coupling DN25 PN40, hose 1", AISI 316	25	18	In stock	Enquiry
RS-FSS2-025-025-SST	FSS end with rotary coupling DN25 PN40, hose 1", AISI 316 / zinc-coated steel.	25	18	In stock	Enquiry
RS-FSS2-032-032-SS	FSS end with rotary coupling DN32 PN40, hose 1.1/4", AISI 316	32	18	In stock	Enquiry
RS-FSS2-032-032-SST	FSS end with rotary coupling DN32 PN40, hose 1.1/4", AISI 316 / zinc-coated steel flange.	32	18	In stock	Enquiry
RS-FSS2-040-038-SS	FSS end with rotary coupling DN40 PN40, hose 1.1/2", AISI 316	38	18	In stock	Enquiry
RS-FSS2-040-038-SST	FSS end with rotary coupling DN40 PN40, hose 1.1/2", AISI 316 / zinc-coated steel flange.	38	18	In stock	Enquiry
RS-FSS2-050-050-SS	FSS end with rotary coupling DN50 PN16, hose 2", AISI 316	50	18	In stock	Enquiry
RS-FSS2-050-050-SST	FSS end with rotary coupling DN50 PN16, 2" hose, AISI 316 / zinc-coated steel flange.	50	18	In stock	Enquiry
RS-FSS4-050-050-SS	FSS end with rotary coupling DN50 PN40, hose 2", AISI 316	50	18	In stock	Enquiry
RS-FSS4-050-050-SST	FSS end with rotary coupling DN50 PN40, hose 2", AISI 316 / zinc-coated steel flange.	50	18	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

FSS end with a rotating flange, for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (EN 14423, DIN 2826, sizes 1/2” to 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American standards ASA (ASME) 150 PSI and 300 PSI. Material: stainless steel AISI 316, galvanized steel. Working pressure: 18 bar (+210°C) for saturated steam and according to the working pressure of the respective flange class at this temperature; for other applications according to the working pressure for the respective flange class (e.g., PN40) – selection in contact with Tubes International.