Is the Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified safe for pumping flammable organic solvents without static buildup?

Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified Format Yes . this hose is designed to reduce static buildup and is suitable for pumping flammable organic solvents when installed and used correctly. Key reasons: - Antistatic PTFE with up to 2.5% carbon black lowers material resistivity and meets EN12115 requirement (<10^6 Î©/m between hose ends), enabling charge dissipation. - Specifically intended for nonâconductive aggressive fluids (e.g., organic solvents) whose flow in standard PTFE can generate dangerous charge accumulation. - Flame retardant (UL94 Vâ0) and high LOI increase safety in flammable environments. - Wide temperature range (â200Â°C to +260Â°C) and working pressure 5.5â12 bar suit many process conditions; safety factor n=4:1 noted. Important caveats: - Antistatic hose does not replace good grounding/earthing practice and proper bonding of couplings and fittings; ends must be electrically connected and continually bonded to a proper earth/ground. - Conductivity is specified between hose ends; resistance can vary with length, fittings, wear, contamination or temperature . verify whole assembly meets your plant/site grounding and equipment standards. - Pressure and burst ratings fall with temperature and hose configuration; ensure operating pressure and temperature margins are respected. - For definitive suitability, validate application with risk assessment and, if required, supplier test certificates and on-site electrical continuity checks.

Can Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified be grounded for safe use with combustible solvents?

Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified can be grounded for safe use with combustible solvents. The hose contains up to 2.5% carbon black (PTFE AS) to reduce electrical resistance and meets EN12115 requirement (<10^6 Î©/m end-to-end), allowing dissipation of charges generated by flowing nonâconductive organic solvents. For safe grounding, use conductive couplings and proper equipotential bonding to a certified earth point, ensure continuity across fittings, and follow applicable industry standards and local regulations. Verify grounding method and periodic resistance checks as part of installation and maintenance.

Does Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified require regular conductivity testing for safe use with solvents?

Antistatic PTFE Hose Black, Smooth-Walled, Chemical Resistant, FDA Compliant, Flame Retardant, -200Â°C to +260Â°C, 5.5â12 bar, EN12115 Certified is manufactured with up to 2.5% carbon black to reduce material resistance and meet EN12115 requirement of less than 10^6 Î©/m between hose ends. This intrinsic antistatic construction is intended to prevent charge accumulation when conveying nonâconductive solvents. However, for safe use with solvents you should implement periodic verification: conductive properties of antistatic PTFE can change over time due to wear, contamination, mechanical damage or thermal/chemical exposure. Many industry standards and safeâuse practices therefore recommend regular conductivity or resistance testing (and visual inspections) to confirm the hose still meets the EN12115 limit and to ensure continued dissipation of electrostatic charge. Frequency depends on application risk, operating conditions and company or regulatory requirements (common practice: initial qualification, then scheduled checksâe.g., monthly, quarterly or per maintenance intervalâor after any repair/abnormal event). Conclusion: While the hose is designed to be antistatic and EN12115âcompliant out of the box, regular conductivity testing is recommended to confirm ongoing safety when handling solvents.

Smooth antistatic hose PTFE PTFE AS

All products, PTFE hoses/

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-200
Vacuum resistance	no
Standard length [m]	50

Light hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon – carbon black (carbon black) – PTFE AS. allows to na reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive np. solvents organic, which flow in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. pressure working: od 5.5 up to 12 bar. temperature use: from -200°C to +260°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
WT-PTFE-AS-04X06	Hose PTFE 4x6 mm, antistatic, black	4	12	In stock	Enquiry
WT-PTFE-AS-06X08	Hose PTFE 6x8 mm, antistatic, black	6	8.7	In stock	Enquiry
WT-PTFE-AS-08X10	Hose PTFE 8x10 mm, antistatic, black	8	7	In stock	Enquiry
WT-PTFE-AS-10X12	Hose PTFE 10x12 mm, antistatic, black	10	5.5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon – carbon black (carbon black) – PTFE AS. allows to na reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive np. solvents organic, which flow in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. pressure working: od 5.5 up to 12 bar. temperature use: from -200°C to +260°C.

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-200
Vacuum resistance	no
Standard length [m]	50