Does the Socket connector, stainless steel, M767LP require a nut and rings on both sides for proper sealing?

No . the Socket connector, stainless steel, M767LP does not require a nut and rings on both sides. One side requires only a nut (sealing is achieved on the cone, so no rings are needed), while the other side requires a complete set: a nut and rings. Pressure ratings depend on tube outer diameter and wall thickness (see attachment). Material: AISI 316 stainless steel.

Can the Socket connector, stainless steel, M767LP be used with different tube wall thicknesses without changing fittings?

No. The Socket connector, stainless steel, M767LP cannot be used with different tube wall thicknesses without changing fittings. The permissible working pressure and correct sealing depend on the tube outer diameter and wall thickness (see attachment). One side requires only a nut sealing on the cone, the other requires a complete set (nut and rings). To ensure proper sealing and pressure rating, fittings (nuts and rings) must match the specific tube wall thickness.

Is the permissible working pressure for the Socket connector, stainless steel, M767LP affected by tube outer diameter and wall thickness?

Yes. The permissible working pressure for the Socket connector, stainless steel, M767LP is determined by the tube outer diameter and wall thickness. According to the product description, allowable pressure values depend on those tube dimensions (details provided in the attachment). Material: AISI 316 steel.

Socket connector, stainless steel, M767LP

All products, LET-LOK precision connectors/

Additional information

Material	SS – stainless steel

The connector allows the connection of two fittings or a fitting with an adapter. A nut is required on one side for the connection, without rings (sealing occurs on the cone), while on the other side a complete set is required – a nut and rings. The permissible working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HM-LM767LP-03-SS	3 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-06-SS	6 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-08-SS	8 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-10-SS	10 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-12-SS	12 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-14-SS	14 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-16-SS	16 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-18-SS	18 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-20-SS	20 mm socket connector, SS	-	-	In stock	Enquiry
HM-LM767LP-25-SS	Connector socket 25 mm, SS	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The connector allows the connection of two fittings or a fitting with an adapter. A nut is required on one side for the connection, without rings (sealing occurs on the cone), while on the other side a complete set is required – a nut and rings. The permissible working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.