Light and flexible suction and discharge hose made of a special oil-resistant PVC blend. Designed for the transfer of mineral oils and hydrocarbons as well as industrial water, wastewater, liquid fertilizers, and certain chemicals – particularly where enhanced PVC resistance to hydrocarbons is required. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). Can be used for some chemical products – diluted acids, bases, and alcohols. The hose maintains its flexibility even at negative working temperatures, and its lightweight and small bending radius ensure convenience and ease of handling. Reinforced with a hard PVC spiral, impact-resistant, providing very good vacuum resistance and preventing hose collapse. Smooth inner and outer surface. Resistant to UV radiation, ozone, weather conditions, and abrasion. Widely used in industry, agriculture, construction, and roadworks. As a hose reinforced with a hard PVC spiral (without a braid), it exhibits some elongation under pressure, which should be considered in applications, especially at temperatures above 40°C. Hose material: blue PVC. Reinforcement: white hard PVC spiral. Working pressure: from 2 bar to 5 bar – depending on the hose diameter. Working temperature: from -25°C to +60°C.