Is the IVALOÂ® suction and discharge hose for liquid petrochemicals suitable for transferring liquids with up to 30% aromatics and operating between -30Â°C and +120Â°C?

Yes. The IVALOÂ® suction and discharge hose for liquid petrochemicals is suitable for transferring liquids containing up to 30% aromatic compounds (excluding ester-based products) and is rated for operation between -30Â°C and +120Â°C. Its construction.black NBR inner layer, synthetic cord reinforcement with two steel spirals, and abrasion- and weather-resistant flame-retardant CR outer layer (manufactured to ASTM C 542).supports use under those chemical and temperature conditions. Note the working pressure is 5 bar and vacuum rating 0.5 bar; ensure these limits match your application.

Can the IVALOÂ® suction and discharge hose for liquid petrochemicals handle suction at 0.5 bar vacuum and a working pressure of 5 bar?

Yes. The IVALOÂ® suction and discharge hose for liquid petrochemicals is specified for a working pressure of 5 bar and a vacuum (suction) of 0.5 bar. Its construction-black NBR inner layer, synthetic cord reinforcement with two steel spirals, and flame-retardant CR outer layer-supports transfer of liquid petrochemical products (up to 30% aromatics) within the stated operating temperature range (â30Â°C to +120Â°C), so it can handle suction at 0.5 bar vacuum and a working pressure of 5 bar.

Does the IVALOÂ® suction and discharge hose for liquid petrochemicals resist oil, ozone, abrasion, and weathering?

Yes. The IVALOÂ® suction and discharge hose for liquid petrochemicals is resistant to oil, ozone, abrasion, and weathering. its outer layer is flameâretardant and specifically described as resistant to abrasion, oil, ozone, and weather conditions.

IVALO® suction and discharge hose for liquid petrochemicals

All products, Oil and petroleum hoses/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	100, 50, 60
Reinforcement	steel spiral, synthetic cover

Very lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
IV-IVALO-016	IVALO hose 16 mm	16	5
IV-IVALO-019	IVALO hose 19 mm	20	5
IV-IVALO-022	IVALO hose 22 mm	22	5
IV-IVALO-025	IVALO hose 25 mm	25	5
IV-IVALO-032	IVALO hose 32 mm	32	5
IV-IVALO-035	IVALO hose 35 mm	35	5
IV-IVALO-038	IVALO hose 38 mm	38	5
IV-IVALO-045	IVALO hose 45 mm	45	5
IV-IVALO-051	Hose IVALO 51 mm	50	5
IV-IVALO-063	IVALO hose 63.5 mm	65	5
IV-IVALO-076	IVALO hose 76 mm	75	5
IV-IVALO-090	IVALO hose 90 mm	90	5
IV-IVALO-102	IVALO hose 102 mm	100	5

Very lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	120
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	100, 50, 60
Reinforcement	steel spiral, synthetic cover