Can SAE split flange lightweight version, carbon steel accommodate DIN 912 12.9 hexagon socket screws of varying lengths for secure hose or pipe mounting?

Yes. The SAE split flange lightweight version, carbon steel can accommodate DIN 912 12.9 hexagon socket screws of varying lengths for secure hose or pipe mounting. The product description explicitly states holes for DIN 912 hexagon socket screws, class 12.9, and the galvanized carbon steel construction provides the strength and corrosion resistance needed for reliable clamping. Varying screw lengths are acceptable so long as thread engagement in the mating component meets standard requirements and the screws do not bottom out or interfere with flange seating. For optimal safety and performance, select screw lengths that achieve proper thread engagement, use the specified 12.9 grade, and follow recommended torque values.

Does SAE split flange lightweight version, carbon steel require specific torque values when using DIN 912 12.9 hexagon socket screws?

Yes. SAE split flange lightweight version, carbon steel requires specific torque values when using DIN 912 12.9 hexagon socket screws. Because the screws are highâstrength class 12.9 and the flange is carbon steel (galvanized), correct tightening torque is essential to ensure joint integrity without overstressing the fasteners or deforming the lightweight flange. Recommended approach: - Use the manufacturerâs specified torque if provided for SAE split flange lightweight version, carbon steel. If no value is given, use standard torque values for Mâsize DIN 912, grade 12.9 bolts into steel. Typical reference torques (dry, property class 12.9) are approximately: - M6 â 10â12 Nm - M8 â 25â30 Nm - M10 â 50â60 Nm - M12 â 85â100 Nm - M16 â 200â230 Nm - Adjustments: reduce torque if threads are lubricated or if the lightweight flange material is thin or prone to crushing; increase slightly if using antiâseize only as specified. Always consider gasket type and clamping requirements. - Procedure: use calibrated torque wrench, tighten in a star/cross pattern progressively in multiple steps to final torque, and avoid peak loads or impacts. - Verification: after initial assembly, recheck torque after short service period if accessible. If critical sealing, pressure rating, or safety is involved, consult the flange supplier or an engineer for exact torque values tailored to the specific bolt size, thread engagement, surface finish, and assembly conditions.

SAE split flange lightweight version, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Split flange SAE 3000 with holes for DIN 912 hexagon socket screws, class 12.9; lightweight version. Enables easy installation of flange adapters or hoses (pipes) with flange ends. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK611-08	SAE split flange 1/2", lightweight	-	-	In stock	Enquiry
TI-ZSK611-12	SAE split flange 3/4", lightweight	-	-	In stock	Enquiry
TI-ZSK611-16	SAE 1" split flange, light weight	-	-	In stock	Enquiry
TI-ZSK611-20	SAE split flange 1.1/4", light weight	-	-	In stock	Enquiry
TI-ZSK611-24	SAE split flange 1.1/2", light weight	-	-	In stock	Enquiry
TI-ZSK611-32	SAE 2" split flange, light weight	-	-	In stock	Enquiry
TI-ZSK611-40	SAE split flange 2.1/2", light weight	-	-	In stock	Enquiry
TI-ZSK611-48	SAE 3" split flange, lightweight	-	-	In stock	Enquiry
TI-ZSK611-56	SAE split flange 3.1/2", light weight	-	-	In stock	Enquiry
TI-ZSK611-64	SAE 4" split flange light weight	-	-	In stock	Enquiry
TI-ZSK611-80	SAE 5" split flange, lightweight	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Split flange SAE 3000 with holes for DIN 912 hexagon socket screws, class 12.9; lightweight version. Enables easy installation of flange adapters or hoses (pipes) with flange ends. Material: carbon steel, galvanized.