Suction and discharge hose for SAE 100 R4 hydraulic oil
Strong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar – depending on the hose diameter. Operating temperature: from -40°C to +100°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| IV-SAE100R4-102 | SAE 100R4 hose 102x115 mm | 100 | 2 | |
| IV-SAE100R4-19 | SAE 100R4 hose 19x30 mm | 20 | 21 | |
| IV-SAE100R4-25 | SAE 100R4 hose 25x38 mm | 25 | 17 | |
| IV-SAE100R4-30 | SAE 100R4 hose 30x41 mm | 30 | 17 | |
| IV-SAE100R4-32 | SAE 100R4 hose 32x43 mm | 32 | 14 | |
| IV-SAE100R4-35 | SAE 100R4 hose 35x47 mm | 35 | 14 | |
| IV-SAE100R4-38 | Hose SAE 100R4 38x49.5 mm | 38 | 10 | |
| IV-SAE100R4-40 | SAE 100R4 hose 40x53 mm | 40 | 10 | |
| IV-SAE100R4-40X51 | SAE 100R4 hose 40x51 mm | 40 | 10 | |
| IV-SAE100R4-42 | SAE 100R4 hose 42x54 mm | 40 | 10 | |
| IV-SAE100R4-45 | Hose SAE 100R4 45x56.5 mm | 45 | 10 | |
| IV-SAE100R4-51 | SAE 100R4 hose 51x64 mm | 50 | 7 | |
| IV-SAE100R4-63 | SAE 100R4 hose 63.5x76 mm | 65 | 4 | |
| IV-SAE100R4-76 | SAE 100R4 hose 76x88 mm | 75 | 4 |
Strong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar – depending on the hose diameter. Operating temperature: from -40°C to +100°C.
Additional information
| Material | synthetic rubber |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | yes |
| Standard length [m] | 40, 50, 60, 60 / 120 |
| Reinforcement | steel spiral, synthetic cover |
