Can Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® be grounded via the two built-in copper wires to prevent static buildup during pneumatic transport?

Yes. Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® can be grounded via its two builtâin copper wires to prevent static buildup during pneumatic transport. The hose description states the two copper conductors are provided specifically to discharge electric charges when connected to a grounded termination. Additionally, the outer layer is antistatic (R < 10^6 Î©), further reducing static risk. For safe and effective grounding, ensure both copper wires are securely connected to a verified earth point at the hose end(s) and that connections are inspected regularly. Follow applicable site electrical grounding standards and the GHIBLI flange installation instructions to maintain continuity and safety.

Can Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® be used with GHIBLI half-flanges PN10 for easy installation in foundries and workshops?

Yes. Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® is designed for installation with the GHIBLI system (aluminum half-flanges PN10 applied externally). Its construction (PU inner layer, synthetic cord and steel spiral reinforcement, corrugated outer SBR/NR layer) and specified working pressures (3â10 bar depending on diameter), vacuum rating (0.9 bar) and antistatic feature make it suitable for easy installation and safe use in foundries and workshops when GHIBLI half-flanges PN10 are used and proper grounding is provided.

Is Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® suitable for conveying hot abrasive materials up to 100Â°C?

Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SFÂ® is suitable for conveying hot abrasive materials up to 100Â°C only temporarily. Standard operating temperature range is â30Â°C to +80Â°C, with short-term resistance up to +100Â°C. For continuous operation at or near 100Â°C, consult the manufacturer to confirm suitability for your specific application and duration.

Suction and delivery hose for sand, chips, fiberglass ABRATECH SD SF®

All products, Bulk material transfer hoses/

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-30
Standard length [m]	12, 20, 30, 40
Reinforcement	steel spiral, synthetic cover

Suction and pressure hose for pneumatic transport of dry abrasive substances. Thick inner layer made of polyurethane, with very high abrasion resistance (below 36 mm³ according to DIN 53516), very smooth and with a low friction coefficient, allowing the conveyed product to slide. Two built-in copper wires that, when grounded (connected to a grounded end), discharge electric charges. The outer layer is corrugated, made of black, antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion, ozone, and aging. The hose is designed for the transport of dry, highly abrasive substances, particularly in foundries, welding shops, the ceramic industry, construction, and woodworking. Installation: The hose is intended for installation using the GHIBLI system – aluminum half-flanges PN10 applied externally to the hose. Inner layer: special polyurethane (PU). Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 3 bar to 10 bar – depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C (temporarily up to +100°C).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MT-ABRATECH-SD-SF-040	ABRATECH SD SF hose 40x67 mm	40	10
MT-ABRATECH-SD-SF-050	ABRATECH SD SF hose 50x77 mm	50	10
MT-ABRATECH-SD-SF-065	ABRATECH SD SF hose 65x92 mm	65	10
MT-ABRATECH-SD-SF-080	Hose ABRATECH SD SF 80x107 mm	80	8
MT-ABRATECH-SD-SF-100	Hose ABRATECH SD SF 100x128 mm	100	8
MT-ABRATECH-SD-SF-125	ABRATECH SD hose 125x155 mm	125	6
MT-ABRATECH-SD-SF-150	ABRATECH SD hose 150x180 mm	150	4
MT-ABRATECH-SD-SF-200	ABRATECH SD hose 200x232 mm	200	3
MT-ABRATECH-SD-SF-254	ABRATECH SD hose 254x289 mm	250	3

Suction and pressure hose for pneumatic transport of dry abrasive substances. Thick inner layer made of polyurethane, with very high abrasion resistance (below 36 mm³ according to DIN 53516), very smooth and with a low friction coefficient, allowing the conveyed product to slide. Two built-in copper wires that, when grounded (connected to a grounded end), discharge electric charges. The outer layer is corrugated, made of black, antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion, ozone, and aging. The hose is designed for the transport of dry, highly abrasive substances, particularly in foundries, welding shops, the ceramic industry, construction, and woodworking. Installation: The hose is intended for installation using the GHIBLI system – aluminum half-flanges PN10 applied externally to the hose. Inner layer: special polyurethane (PU). Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 3 bar to 10 bar – depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C (temporarily up to +100°C).

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-30
Standard length [m]	12, 20, 30, 40
Reinforcement	steel spiral, synthetic cover