Is the TEMA 100 measuring plug with cap and hose compatible with standard TEMA 100 sockets and safe for use with galvanized steel fittings?

Yes. The TEMA 100 measuring plug with cap and hose Format is designed to mate with a TEMA 100 socket, and its description specifies it is intended for connection with a TEMA 100 socket. It is made of galvanized steel and uses a PVC cap and a thermoplastic hose. Galvanized steel is commonly compatible and suitable for typical socket fittings; however, ensure the specific TEMA 100 socket you have matches the same TEMA 100 standard and dimensions. Also verify that the applicationâs pressure, temperature, fluid chemistry and any required sealing materials are compatible with galvanized steel, PVC and the thermoplastic hose to ensure safe, long-term use.

Can the TEMA 100 measuring plug with cap and hose withstand exposure to chemicals and outdoor conditions when made of galvanized steel?

The TEMA 100 measuring plug with cap and hose, when made of galvanized steel, offers good basic corrosion resistance and mechanical protection for outdoor use and mild chemical exposure. Galvanizing protects the steel from rust and weathering, and the PVC cap plus thermoplastic hose add further resistance to moisture and many common substances. However, galvanized steel can be attacked by strong acids, alkalis, chlorides, or solvents; PVC and thermoplastic hoses also have specific chemical compatibility limits and degrade under prolonged UV or aggressive chemical exposure. For reliable long-term outdoor or chemical service, verify the exact chemicals, concentrations, temperatures and UV exposure; consider stainless steel or specialized polymers if exposed to aggressive agents.

How do I properly clean and maintain the TEMA 100 measuring plug with cap and hose to prevent corrosion?

To properly clean and maintain the TEMA 100 measuring plug with cap and hose to prevent corrosion, follow these steps: 1. Safety first - Disconnect and depressurize the system before handling the TEMA 100 measuring plug with cap and hose. - Wear appropriate PPE: gloves, eye protection, and any required chemical-resistant gear. 2. Remove and inspect - Detach the thermoplastic hose and PVC cap from the TEMA 100 measuring plug with cap and hose. - Visually inspect the galvanized steel surfaces for rust, pitting, or coating damage, and check hose and cap for cracks or degradation. 3. Cleaning procedure - Rinse the plug, cap and hose with clean water to remove loose dirt and residue. - For routine cleaning use a mild detergent solution and a soft brush or cloth; avoid abrasive tools that can scratch the galvanized coating. - For mineral deposits or light corrosion, use a diluted vinegar solution (acetic acid) or a commercially available descaler compatible with galvanized steel. Rinse thoroughly after treatment. - Do not use strong acids, strong alkalis, or chloride-containing cleaners (e.g., concentrated hydrochloric acid, bleach) that can damage galvanized zinc coating and promote corrosion. 4. Drying - Immediately and completely dry the TEMA 100 measuring plug with cap and hose after cleaning. Use compressed air or clean, lint-free cloths to remove moisture from threads, crevices and hose ends. 5. Protective measures - Apply a light, compatible corrosion-inhibiting lubricant or protective spray formulated for galvanized steel to threaded and exposed metal areas. Wipe off excess to avoid attracting dirt. - Ensure the PVC cap is fitted securely to keep moisture and contaminants out when not in use. - Inspect the thermoplastic hose for flexibility and integrity; replace if brittle or cracked. Ensure hose fittings are tight and leak-free. 6. Storage and service intervals - Store the TEMA 100 measuring plug with cap and hose in a dry, well-ventilated area away from corrosive chemicals and high humidity. - Establish regular inspection and cleaning intervals based on operating environment (monthly in aggressive environments, quarterly to biannually in mild conditions). - Replace components showing significant galvanizing loss, deep corrosion, or mechanical damage. Following these steps will minimize corrosion risk and extend the service life of the TEMA 100 measuring plug with cap and hose.

TEMA 100 measuring plug with cap and hose

All products, Measurement sets/

Additional information

Material	CS – steel (cast iron)

Measurement plug equipped with a PVC cap, intended for connection with TEMA 100 socket, additionally connected with thermoplastic hose. Material: galvanized steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TA-M-139	Adaptor (hose) GW M16x2 / measuring plug TEMA SYSTEM 100	-	400	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Measurement plug equipped with a PVC cap, intended for connection with TEMA 100 socket, additionally connected with thermoplastic hose. Material: galvanized steel.