Is Thread sealer AN30-280, pen suitable for sealing dynamic hydraulic or pneumatic joints that may require future disassembly?

Thread sealer AN30-280, pen is not recommended for sealing dynamic hydraulic or pneumatic joints that may require future disassembly. Product description indicates it is an anaerobic thread sealant for passive materials with increased viscosity and high strength, making disassembly very difficult. It is formulated to fill gaps up to 0.20 mm and withstand -60Â°C to +180Â°C, so it is suitable for permanent, high-strength seals in hydraulic and pneumatic systems, but its difficult disassembly characteristic makes it unsuitable where regular maintenance, adjustment or part replacement is expected. If future disassembly is required, choose a low-strength or removable thread sealant designed for dynamic joints.

Can Thread sealer AN30-280, pen be used on passive materials without an activator for static hydraulic or pneumatic seals?

Yes. Thread sealer AN30-280, pen is an anaerobic thread sealant formulated for passive materials and can cure without a separate activator, making it suitable for static hydraulic and pneumatic seals. It offers increased viscosity and high strength (very difficult disassembly), seals gaps up to 0.20 mm, and operates from â60Â°C to +180Â°C. Supplied in 20 ml and 50 ml pen packaging, color green. Ensure surfaces are clean and assembled parts provide the specified gap for proper cure.

Does Thread sealer AN30-280, pen resist common hydraulic fluids and lubricants over time?

Yes. Thread sealer AN30-280, pen is formulated as an anaerobic thread sealant for passive materials and is intended for sealing hydraulic and pneumatic systems, which indicates it is designed to resist typical hydraulic fluids and lubricants encountered in such systems. Its properties. increased viscosity and high strength with very difficult disassembly, a temperature range of â60Â°C to +180Â°C, and ability to seal gaps up to 0.20 mm. support long-term sealing performance and chemical resistance under normal operating conditions. However, actual long-term compatibility depends on the specific fluid chemistry (e.g., phosphate esters, turbomachinery oils, aggressive synthetic fluids, fuel blends, or concentrated solvents) and exposure conditions (temperature extremes, pressure, and immersion time). For critical applications or exposure to aggressive or specialty fluids, confirm compatibility with the sealant manufacturer or perform compatibility testing.

Sealant for threads AN30-280, pen

All products, Seals and thread sealants/

Additional information

An anaerobic thread sealant, for materials passive without activator. Sealing of hydraulic and pneumatic systems. elevated viscosity, high strength – disassembly possible. Gap maximum 0.20 mm. color: green. Operating temperature: od -60°C up to +180°C. Packaging of the “pen” type with a capacity of: 20 and 50 ml.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
WE-AN30-280-P-020	Sealant AN30280 - pen 20 ml	-	-	In stock	0 zł		Enquiry
WE-AN30-280-P-050	Sealant AN30280 - pen 50 ml	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

An anaerobic thread sealant, for materials passive without activator. Sealing of hydraulic and pneumatic systems. elevated viscosity, high strength – disassembly possible. Gap maximum 0.20 mm. color: green. Operating temperature: od -60°C up to +180°C. Packaging of the “pen” type with a capacity of: 20 and 50 ml.