Is the Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. sterilizable by steam, CIP/SIP, ethylene oxide, and radiation up to 5 Mrad?

Yes. The Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. is sterilizable by steam (30 min, 1 bar, 121Â°C), suitable for CIP and SIP cleaning of installations, sterilizable by ethylene oxide, and by radiation up to 5 Mrad.

Can Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. be used for aseptic vaccine filling lines and bioreactor connections?

Yes. Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. is suitable for aseptic vaccine filling lines and bioreactor connections. Its platinum-cured silicone construction, exceptionally smooth internal surface and minimal bioburden prevent contaminant deposition and bacterial growth, allowing complete cleaning and sterilization (CIP/SIP, steam 121Â°C/30 min, EtO, radiation up to 5 Mrad). Low extractables, non-toxicity, non-hemolytic and non-pyrogenic properties, plus compliance with FDA 21 CFR 177.2600, 3-A and USP Class VI, ensure fluid purity for sensitive applications. Reinforced design supports higher pressures with defined working pressure using a 1:4 safety factor; operating temperature up to 160Â°C. Packaged in a clean room for sterile handling.

Does Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. meet FDA 21 CFR 177.2600, 3-A, and USP Class VI hygiene standards?

Yes. Ultra-smooth braided silicone hose for pharmaceutical and biotech applications TYGONÂ® 3370 I.B. meets the hygienic and biocompatibility requirements referenced: FDA 21 CFR 177.2600, 3-A Sanitary Standards, and USP Class VI. The product description explicitly states compliance, and its attributesâplatinum-cured silicone, exceptionally smooth internal surface, low extractables, non-toxic, non-hemolytic, non-pyrogenic, minimal bioburden, and suitability for steam sterilization, CIP/SIP, ethylene oxide and radiationâsupport conformity with those standards for pharmaceutical, biotech, food and cosmetic applications.

Ultra smooth hose silicone with a braid for applications pharmaceutical and biotechnological TYGON® 3370 I.B.

All products, TYGON® hoses/

Additional information

Material	VMQ – silicone
Maximum operating temperature [°C]	160
Vacuum resistance	yes
Standard length [m]	15, 30

Colorless, semi-transparent, reinforced a braid flexible hose with rubber silicone vulcanized platinum. intended for higher pressures. used in industry pharmaceutical, cosmetic, food, biotechnology, sterile lines filling, systems treatment water, production vaccines, bioreactors. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. minimal level loads biological (bioburden). meets requirements hygienic American FDA 21 CFR 177.2600, 3-A and USP Class VI. possible sterilization steam (30 min, 1 bar, 121°C), cleaning CIP and SIP installations, oxide ethylene or radiation (for 5 Mrad). Length of a full hose roll 15 m (od diameter internal 31.8 mm – 7.5 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. temperature brittleness: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
VE-T1306-43	Hose TYGON 3370 I.B. 4.8x11.3 mm	5	11.72	In stock	Enquiry
VE-T1308-43	Hose TYGON 3370 I.B. 6.4x13.2 mm	6	10.34	In stock	Enquiry
VE-T1312-43	Hose TYGON 3370 I.B. 9.6x17.6 mm	10	8.96	In stock	Enquiry
VE-T1316-63	Hose TYGON 3370 I.B. 12.7x21.5 mm	12	8.62	In stock	Enquiry
VE-T1320-63	Hose TYGON 3370 I.B. 15.9x24.9 mm	16	7.58	In stock	Enquiry
VE-T1324-63	Hose TYGON 3370 I.B. 19x29.2 mm	20	6.89	In stock	Enquiry
VE-T1332-63	Hose TYGON 3370 I.B. 25.4x35.3 mm	25	4.83	In stock	Enquiry
VE-T1340-66	Hose TYGON 3370 I.B. 31.8x41.6 mm	32	3.79	In stock	Enquiry
VE-T1348-66	Hose TYGON 3370 I.B. 38.1x47.9 mm	38	2.76	In stock	Enquiry
VE-T1364-86	Hose TYGON 3370 I.B. 50.8x61.8 mm	50	1.38	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Colorless, semi-transparent, reinforced a braid flexible hose with rubber silicone vulcanized platinum. intended for higher pressures. used in industry pharmaceutical, cosmetic, food, biotechnology, sterile lines filling, systems treatment water, production vaccines, bioreactors. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. minimal level loads biological (bioburden). meets requirements hygienic American FDA 21 CFR 177.2600, 3-A and USP Class VI. possible sterilization steam (30 min, 1 bar, 121°C), cleaning CIP and SIP installations, oxide ethylene or radiation (for 5 Mrad). Length of a full hose roll 15 m (od diameter internal 31.8 mm – 7.5 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. temperature brittleness: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.