Can the Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel, handle continuous operation at 45 l/min and up to 160Â°C without pressure loss?

Yes. The Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel, handle continuous operation at 45 l/min and up to 160Â°C without pressure loss. Specification lists flow rate 45 l/min, working pressure up to 250 bar (permissible 280 bar) and operating temperature up to +160Â°C; with stainless steel construction and proper GZ 1/4" BSP inlet / GW 1/4" NPT outlet connections it is designed to operate continuously at those conditions without inherent pressure loss beyond normal system friction. Ensure your washer and fittings meet the same pressure/temperature ratings, use appropriate seals and correct mounting, and follow manufacturer maintenance to avoid leaks or performance drop.

Does the Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel require special seals for 250â280 bar operation?

Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel does not explicitly require special seals beyond those rated for its maximum permissible pressure (280 bar) and temperature (up to +160Â°C). Use seals and fittings compatible with the connection types (inlet GZ 1/4" BSP, outlet GW 1/4" NPT), rated for at least 280 bar and suitable for the fluid and temperature. Prefer high-pressure, chemical- and heat-resistant materials (e.g., PTFE, Viton, or other specified high-pressure O-rings). Always follow manufacturer recommendations and pressure-rating safety margins; if in doubt, consult the supplier or a qualified technician.

Is the Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel compatible with NPT-to-BSP adapters?

Vented extension lance with nozzle guard, for high-pressure washer gun, stainless steel has the following factory connections: inlet GZ 1/4" BSP (male BSP thread) and outlet GW 1/4" NPT (female NPT thread). The outlet already uses 1/4" NPT, so it will accept a compatible 1/4" NPT male fitting without any adapter. If you need to connect NPT-to-BSP adapters: physically you can use an appropriate adapter to convert between BSP and NPT, but be aware that BSP (parallel or tapered) and NPT (tapered) threads are not identical. they differ in thread form and pitch. Using a purpose-made NPT-to-BSP adapter or a transition fitting rated for high pressure is required to ensure a proper seal and safety at the lanceâs working pressure (up to 250 bar, permissible 280 bar). Also ensure the adapter material and pressure rating match (stainless steel recommended) and use correct sealing method (PTFE tape or suitable thread sealant rated for high pressure and temperature up to 160Â°C). Summary: the outlet is 1/4" NPT so direct NPT fittings fit. If converting between NPT and BSP, use a correct high-pressure NPT-to-BSP adapter rated â¥280 bar and compatible material.

Lance extension ventilated with cover nozzle, for gun for a high-pressure washer, steel stainless

All products, Guns for high-pressure washers/

Additional information

Lance extension ventilated with cover nozzle, intended for a high-pressure washer. Connections: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-1022220100	Lance wentylowana 700 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry
MH-1022220200	Lance wentylowana 900 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry
MH-1022220300	Lance wentylowana 1200 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry
MH-1022220400	Lance wentylowana 1500 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry
MH-1022220500	Lance wentylowana 1700 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry
MH-1022220600	Lance wentylowana 2000 mm with guard nozzle, stainless steel	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lance extension ventilated with cover nozzle, intended for a high-pressure washer. Connections: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.