Is the VKA plug, stainless steel, with 24Â° cone and Viton O-ring compatible with DIN 2353 M nuts in both L (light) and S (heavy) series?

Yes. The VKA plug, stainless steel, with a 24Â° cone and Viton O-ring is compatible with DIN 2353 M nuts in both L (light) and S (heavy) series. The product description explicitly states compatibility with DIN 2353 type M nuts and lists availability for both L (light series) and S (heavy series). Made of AISI 316 stainless steel and featuring the 24Â° cone plus Viton O-ring, it meets the form and sealing requirements for use with DIN 2353 M nuts across both series.

Does the VKA plug, stainless steel, with 24Â° cone and Viton O-ring meet pressure ratings for both L (light) and S (heavy) DIN 2353 series?

Yes. The VKA plug, stainless steel, with 24Â° cone and Viton O-ring is compatible with both L (light) and S (heavy) DIN 2353 series-its description explicitly lists availability as L (light series) and S (heavy series) and notes compatibility with DIN 2353 type M nuts. Pressure ratings, however, will match those specified for the respective DIN 2353 series and size when assembled per standard; verify exact pressure/size limits in the DIN 2353 table for the chosen series and nominal size.

Can the VKA plug, stainless steel, with 24Â° cone and Viton O-ring be used in high-temperature applications?

Yes. the VKA plug, stainless steel, with 24Â° cone and Viton O-ring can be used in many high-temperature applications, but with important limits to consider. Key points: - Body material AISI 316 (stainless steel) offers excellent high-temperature strength and corrosion resistance, suitable for elevated-temperature environments. - Viton (FKM) O-ring provides good heat resistance compared with many elastomers; typical continuous-use temperature range is roughly â20Â°C to +200Â°C (up to about +220Â°C for short periods), depending on compound and service conditions. - For continuous operation above ~200Â°C the Viton O-ring will degrade, harden and lose sealing performance; at elevated temperatures chemical compatibility (media, pressure, oxidative environment) further affects life. - Pressure, dynamic movement, and exposure to aggressive chemicals or steam can shorten O-ring life even within nominal temperature limits. - If your application uses temperatures below ~200Â°C, compatible fluids, and expected pressures within the fittingâs rating, the VKA plug, stainless steel with Viton O-ring is generally suitable. - For sustained service above ~200Â°C, or where failure is critical, consider alternatives: high-temperature elastomers (e.g., perfluoroelastomer FFKM), metal-to-metal seals, or consult the manufacturer for certified high-temp variants. Recommendation: Verify actual operating temperature, media compatibility, and pressure; consult the manufacturerâs datasheet or technical support for O-ring compound specifics and maximum service temperatures before final selection.

Cap VKA, stainless steel

Additional information

Material	SS – stainless steel

Cap DIN 2353, type VKA: 24° cone DIN 2353 with an O-ring Viton. Compatible with nut DIN 2353 type M. Available as: L (series light), S (series heavy). Material: AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-VKA-06L-S-SS	Cap DIN 2353 6L/S, AISI 316	-	500	In stock	Enquiry
HD-VKA-08L-S-SS	Cap DIN 2353 8L/S, AISI 316	-	500	In stock	Enquiry
HD-VKA-10L-S-SS	Cap DIN 2353 10L/S, AISI 316	-	500	In stock	Enquiry
HD-VKA-12L-S-SS	Cap DIN 2353 12L/S, AISI 316	-	400	In stock	Enquiry
HD-VKA-14S-SS	Cap DIN 2353 14S, AISI 316	-	630	In stock	Enquiry
HD-VKA-15L-SS	Cap DIN 2353 15L, AISI 316	-	400	In stock	Enquiry
HD-VKA-16S-SS	Cap DIN 2353 16S, AISI 316	-	630	In stock	Enquiry
HD-VKA-18L-SS	Cap DIN 2353 18L, AISI 316	-	400	In stock	Enquiry
HD-VKA-20S-SS	Cap DIN 2353 20S, AISI 316	-	420	In stock	Enquiry
HD-VKA-22L-SS	Cap DIN 2353 22L, AISI 316	-	250	In stock	Enquiry
HD-VKA-25S-SS	Cap DIN 2353 25S, AISI 316	-	420	In stock	Enquiry
HD-VKA-28L-SS	Cap DIN 2353 28L, AISI 316	-	250	In stock	Enquiry
HD-VKA-30S-SS	Cap DIN 2353 30S, AISI 316	-	420	In stock	Enquiry
HD-VKA-35L-SS	Cap DIN 2353 35L, AISI 316	-	250	In stock	Enquiry
HD-VKA-38S-SS	Cap DIN 2353 38S, AISI 316	-	420	In stock	Enquiry
HD-VKA-42L-SS	Cap DIN 2353 42L, AISI 316	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Cap DIN 2353, type VKA: 24° cone DIN 2353 with an O-ring Viton. Compatible with nut DIN 2353 type M. Available as: L (series light), S (series heavy). Material: AISI 316.