Is the Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 suitable for outdoor use and resistant to corrosion over time?

Yes. The Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 is suitable for outdoor use and offers good long-term resistance to corrosion. It is made of electropolished AISI 304 stainless steel, which provides solid corrosion resistance in typical outdoor environments (rain, humidity, garden use). Electropolishing further improves surface smoothness and removes surface contaminants, reducing sites where corrosion can start and making the surface easier to clean. However, AISI 304 is not fully immune to corrosion in more aggressive conditions.prolonged exposure to salt spray, coastal/sea-air environments, or strong chemical exposure can eventually lead to pitting or crevice corrosion. For heavy coastal or industrial environments, AISI 316 or additional protective measures (regular cleaning, rinsing off salt, protective coatings) would be preferable. In summary: for normal outdoor garden and domestic use, the Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 is a durable, corrosion-resistant choice; for harsh marine or highly corrosive settings consider higher-grade stainless or extra protection.

Does the Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 require special anchors for mounting on drywall?

Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 does not explicitly state required fixings in the provided description. The electropolished AISI 304 steel hanger is intended for convenient wall storage of hose, but for mounting on drywall you should use suitable drywall anchors or wall plugs rated for the hangerâs weight and expected load. Use heavy-duty drywall anchors (toggle bolts or molly anchors) if no studs are available; if you can mount into studs, standard wood screws into the stud are sufficient. Ensure anchors and screws are corrosion-resistant to match the stainless steel and tighten per manufacturer torque recommendations.

Can Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 be used with reinforced concrete or brick walls without additional support?

Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 is made of electropolished AISI 304 stainless steel and is designed for convenient storage of hoses. Jednak sam opis produktu nie zawiera informacji o sposobie montaÅ¼u ani o wymaganiach dotyczÄcych kotwienia. Czy moÅ¼na go uÅ¼yÄ do montaÅ¼u na beton zbrojony lub cegle bez dodatkowego wsparcia? W wiÄkszoÅci przypadkÃ³w tak. jeÅli Åciana jest solidna (reinforced concrete lub peÅna cegÅa) i uÅ¼yte zostanÄ odpowiednie koÅki rozporowe lub kotwy dopasowane do noÅnoÅci podÅoÅ¼a oraz obciÄÅ¼enia, ktÃ³re bÄdzie przenosiÅ wieszak z wymienionÄ dÅugoÅciÄ i ÅrednicÄ wÄÅ¼a. Kluczowe jest jednak: - UÅ¼ycie odpowiednich elementÃ³w mocujÄcych (koÅki rozporowe, kotwy sprÄÅ¼ynowe lub chemiczne) dobranych do materiaÅu Åciany i obciÄÅ¼enia. - MontaÅ¼ w miejscu bez spÄkaÅ i osÅabieÅ strukturalnych. - Zapewnienie, Å¼e podÅoÅ¼e ma wystarczajÄcÄ noÅnoÅÄ dla dynamicznych i statycznych siÅ (masa zwiniÄtego wÄÅ¼a, ewentualne szarpniÄcia). - Zachowanie instrukcji producenta dotyczÄcych rozstawu i liczby punktÃ³w mocowania (jeÅli sÄ dostÄpne). JeÅ¼eli nie masz pewnoÅci co do stanu Åciany lub wÅaÅciwych kotew, zaleca siÄ skonsultowaÄ z fachowcem budowlanym lub uÅ¼yÄ dodatkowego wzmocnienia (pÅyt montaÅ¼owych, wiÄkszych kotew chemicznych). Bez tych weryfikacji nie moÅ¼na jednoznacznie stwierdziÄ, Å¼e Wall mount for 1/2" or 3/4" hose, stainless steel, REKFR-1 bÄdzie bezpieczny na kaÅ¼dej betonowej czy ceglanej Åcianie bez dodatkowego wsparcia.

Wall mount for 1/2″ or 3/4″ hose, stainless steel, REKFR-1

All products, Reel accessories/

Additional information

Material	SS – stainless steel

Hanger designed for easy storage of 1/2″ (20 meters) or 3/4″ (20 meters) hose. Enhances work comfort and increases hose lifespan. Convenience and space-saving. Material: electropolished AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-REKFR30	Hose hanger 1/2" (25 m) or 3/4" (20 m)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hanger designed for easy storage of 1/2″ (20 meters) or 3/4″ (20 meters) hose. Enhances work comfort and increases hose lifespan. Convenience and space-saving. Material: electropolished AISI 304 steel.