Does the Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel, with 24Â° DIN 2353 O-ring and internal/external metric threads require special installation tools or torque settings?

The Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel (24Â° DIN 2353 O-ring, internal/external metric threads) does not generally require special installation tools beyond standard DIN 2353 fitting tools. Installation normally uses torque wrenches and spanners sized to the fitting hex flats to achieve correct assembly; for O-ring fittings ensure clean mating surfaces, correct O-ring position and light lubrication if recommended. Follow these points: - Use standard DIN 2353 installation practice: tighten the nut onto the male thread until the 24Â° cone seats and the O-ring is compressed to form a seal. - Use appropriate spanners/wrenches or calibrated torque wrench as needed; there is no unique proprietary tool required for the KORO-S type. - Torque: DIN 2353 does not specify a single universal torque value because torque depends on thread size, material and surface condition. Refer to Eaton/Walterscheid or DIN 2353 torque tables for the correct tightening torque for the specific metric thread size and series (S/heavy). If manufacturer data are unavailable, tighten by the recommended method in DIN 2353 (turning angles or wrench sizes) rather than an arbitrary torque. - Inspection: after assembly check for correct engagement, O-ring integrity and leak-free performance. Re-torque only as specified by supplier. In summary: no special proprietary tools are required, but use correct DIN 2353 installation procedure and appropriate torque/wrench guidance for the specific metric thread size of the Walterscheidâ¢ KORO-S fitting.

Can Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel, 24Â° DIN 2353 O-ring be used with metric-thread hydraulic adapters from other manufacturers?

Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel (24Â° DIN 2353 O-ring) can generally be used with metric-thread hydraulic adapters from other manufacturers only if those adapters strictly conform to DIN 2353 dimensions, 24Â° seat angle, and compatible O-ring groove specifications. Critical checks: matching thread type and pitch (internal/external metric), correct 24Â° cone seating, identical O-ring size/location and groove geometry, and compatible material/pressure ratings. Mismatched tolerances, seat angle, or O-ring groove can cause leaks or failure. For safety and warranty, verify manufacturer compatibility data or perform pressure testing; when in doubt, use DIN 2353-certified adapters from the same or approved manufacturers.

Are there temperature or chemical limits for Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel?

Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel. Temperature and chemical limits Temperature limits: - The base material (carbon steel) and the Guardian Sealâ¢ galvanic coating allow typical hydraulic service temperature ranges from approximately -40Â°C up to about +120Â°C under normal hydraulic fluids and pressures. - At temperatures below -40Â°C the steel may become less ductile; at temperatures above +120Â°C the sealing materials (O-ring) and any lubricant/assembly compounds can degrade, reducing sealing performance and service life. - For short-term excursions slightly beyond these bounds, consult system design and O-ring material specifications; long-term exposure above +120Â°C is not recommended. Chemical compatibility: - Carbon steel with Guardian Sealâ¢ galvanic coating offers good resistance to common hydraulic oils (mineral oil based) and many petroleum-derived fluids. - The O-ring material (not specified in the provided description) is the critical element for chemical compatibility. Standard O-rings are typically NBR (nitrile) or FKM/Viton; compatibility varies: - NBR: good with mineral oils, fuels; poor with ketones, some esters, and aggressive chemicals. - FKM: better high-temperature and oil resistance; poorer compatibility with certain ketones and amines. - The galvanic coating provides corrosion protection but can be attacked by strong acids, strong alkalis, or chloride-rich environments (leading to pitting or coating failure). - Avoid prolonged exposure to aggressive chemicals (strong acids, alkalis, chlorinated hydrocarbons, some solvents) without verifying compatibility of both the coating and the O-ring elastomer. Recommendation: - Verify the exact O-ring material used in your Walterscheidâ¢ KORO-S straight reduction fitting, carbon steel and consult the fluid and environment chemical compatibility charts for that elastomer and for galvanized carbon steel. - For critical or extreme temperature/chemical environments, contact the manufacturer or Eaton Walterscheid technical support for validated limits and alternative material options (e.g., stainless steel fittings, special coatings, or specific elastomers).

Walterscheid™ KORO-S straight reduction fitting, carbon steel

Additional information

Material	CS – steel (cast iron)

DIN 2353 fitting Eaton Walterscheid™ straight reducing, type KORO-S heavy series: 24° DIN 2353 socket with O-ring with internal metric thread and external metric thread. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Seal™ galvanic coating.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-KORO-08-06S-W	Walterscheid fitting DIN 2353 KORO 8/6S	-	800	In stock	Enquiry
HD-KORO-10-06S-W	Walterscheid fitting DIN 2353 KORO 10/6S	-	800	In stock	Enquiry
HD-KORO-10-08S-W	Walterscheid fitting DIN 2353 KORO 10/8S	-	800	In stock	Enquiry
HD-KORO-12-06S-W	Walterscheid fitting DIN 2353 KORO 12/6S	-	630	In stock	Enquiry
HD-KORO-12-08S-W	Walterscheid fitting DIN 2353 KORO 12/8S	-	630	In stock	Enquiry
HD-KORO-12-10S-W	Walterscheid fitting DIN 2353 KORO 12/10S	-	630	In stock	Enquiry
HD-KORO-16-06S-W	Walterscheid fitting DIN 2353 KORO 16/6S	-	630	In stock	Enquiry
HD-KORO-16-08S-W	Walterscheid fitting DIN 2353 KORO 16/8S	-	630	In stock	Enquiry
HD-KORO-16-10S-W	Walterscheid fitting DIN 2353 KORO 16/10S	-	630	In stock	Enquiry
HD-KORO-16-12S-W	Walterscheid fitting DIN 2353 KORO 16/12S	-	630	In stock	Enquiry
HD-KORO-16-14S-W	Walterscheid fitting DIN 2353 KORO 16/14S	-	630	In stock	Enquiry
HD-KORO-20-06S-W	Walterscheid fitting DIN 2353 KORO 20/6S	-	420	In stock	Enquiry
HD-KORO-20-08S-W	Walterscheid fitting DIN 2353 KORO 20/8S	-	420	In stock	Enquiry
HD-KORO-20-10S-W	Walterscheid fitting DIN 2353 KORO 20/10S	-	420	In stock	Enquiry
HD-KORO-20-12S-W	Walterscheid fitting DIN 2353 KORO 20/12S	-	420	In stock	Enquiry
HD-KORO-20-14S-W	Walterscheid fitting DIN 2353 KORO 20/14S	-	420	In stock	Enquiry
HD-KORO-20-16S-W	Walterscheid fitting DIN 2353 KORO 20/16S	-	420	In stock	Enquiry
HD-KORO-25-06S-W	Walterscheid fitting DIN 2353 KORO 25/6S	-	420	In stock	Enquiry
HD-KORO-25-08S-W	Walterscheid fitting DIN 2353 KORO 25/8S	-	420	In stock	Enquiry
HD-KORO-25-10S-W	Walterscheid fitting DIN 2353 KORO 25/10S	-	420	In stock	Enquiry
HD-KORO-25-12S-W	Walterscheid fitting DIN 2353 KORO 25/12S	-	420	In stock	Enquiry
HD-KORO-25-16S-W	Walterscheid fitting DIN 2353 KORO 25/16S	-	420	In stock	Enquiry
HD-KORO-25-20S-W	Walterscheid fitting DIN 2353 KORO 25/20S	-	420	In stock	Enquiry
HD-KORO-30-06S-W	Walterscheid fitting DIN 2353 KORO 30/6S	-	400	In stock	Enquiry
HD-KORO-30-08S-W	Walterscheid fitting DIN 2353 KORO 30/8S	-	400	In stock	Enquiry
HD-KORO-30-10S-W	Walterscheid fitting DIN 2353 KORO 30/10S	-	400	In stock	Enquiry
HD-KORO-30-12S-W	Walterscheid fitting DIN 2353 KORO 30/12S	-	400	In stock	Enquiry
HD-KORO-30-16S-W	Walterscheid fitting DIN 2353 KORO 30/16S	-	400	In stock	Enquiry
HD-KORO-30-20S-W	Walterscheid fitting DIN 2353 KORO 30/20S	-	400	In stock	Enquiry
HD-KORO-30-25S-W	Walterscheid fitting DIN 2353 KORO 30/25S	-	400	In stock	Enquiry
HD-KORO-38-06S-W	Walterscheid fitting DIN 2353 KORO 38/6S	-	400	In stock	Enquiry
HD-KORO-38-08S-W	Walterscheid fitting DIN 2353 KORO 38/8S	-	400	In stock	Enquiry
HD-KORO-38-10S-W	Walterscheid fitting DIN 2353 KORO 38/10S	-	400	In stock	Enquiry
HD-KORO-38-12S-W	Walterscheid fitting DIN 2353 KORO 38/12S	-	400	In stock	Enquiry
HD-KORO-38-16S-W	Walterscheid fitting DIN 2353 KORO 38/16S	-	400	In stock	Enquiry
HD-KORO-38-20S-W	Walterscheid fitting DIN 2353 KORO 38/20S	-	400	In stock	Enquiry
HD-KORO-38-25S-W	Walterscheid fitting DIN 2353 KORO 38/25S	-	400	In stock	Enquiry
HD-KORO-38-30S-W	Walterscheid fitting DIN 2353 KORO 38/30S	-	400	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DIN 2353 fitting Eaton Walterscheid™ straight reducing, type KORO-S heavy series: 24° DIN 2353 socket with O-ring with internal metric thread and external metric thread. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Seal™ galvanic coating.