Is the "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® (acetal) rated for continuous use at up to 2 bar and +76Â°C?

Yes. The "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® is specified with a working pressure of up to 2 bar and an operating temperature up to +76Â°C, so it is rated for use up to those limits. Continuous operation at or below 2 bar and +76Â°C falls within the stated specifications. If your application will see higher pressure, higher temperature, or prolonged thermal cycling near those limits, consider a safety margin or contact the manufacturer for confirmation under your exact duty conditions.

Can the "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® (acetal) withstand brief pressure spikes above 2 bar or temperatures over +76Â°C?

The "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® is rated for a working pressure up to 2 bar and an operating temperature up to +76Â°C. Brief, occasional excursions slightly above these limits may not cause immediate failure, but they exceed the specified ratings and can reduce service life, cause deformation, leaks or sudden failure-especially under combined pressure and temperature stress. For safety and reliability, avoid sustained or repeated spikes above 2 bar or temperatures over +76Â°C; if such conditions are possible, choose a component with higher pressure and temperature ratings or consult the manufacturer for suitability and testing data.

Does the "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® (acetal) require special mounting to meet 2 bar and +76Â°C ratings?

No. The "Y" reduction tee for coolant, 1/2" system, LOC-LINEÂ® (acetal) does not require any special mounting to meet its stated ratings. Its material (acetal) and design are specified for a working pressure up to 2 bar and an operating temperature up to +76Â°C; when installed as intended in a compatible 1/2" LOC-LINEÂ® system with proper push-fit connections and without undue mechanical stress, it will maintain those ratings. Ensure fittings are fully seated, avoid exposure to temperatures or pressures above the specified limits, and prevent prolonged chemical exposure or mechanical loading that could compromise the acetal.

“Y” reduction tee for coolant, 1/2″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

Material	P – material (plastic)

Reducing “Y” tee 1/2″ to 2 x 1/4″ for LOC-LINE® coolant – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-59870	Reducing tee 1/2" to 2x1/4" (1/2" system)	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Reducing “Y” tee 1/2″ to 2 x 1/4″ for LOC-LINE® coolant – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.