Is the Tee fitting T, carbon steel, compatible with standard 24Â° DIN 2353 metric threaded ports and interchangeable across LL, L, and S series?

Yes. The Tee fitting T, carbon steel Format uses a 24Â° DIN 2353 socket with external metric threads, so it is compatible with standard 24Â° DIN 2353 metric threaded ports. Because it is available in LL (very light), L (light) and S (heavy) series, the thread form and sealing principle follow the DIN 2353 standard and are therefore interchangeable across LL, L and S series in terms of thread fit and 24Â° sealing interface. Note: while threads and 24Â° sealing faces are compatible, ensure series-specific dimensional and pressure-class differences (wall thickness, hex sizes, and rated working pressures) meet your application requirements before substituting between LL, L and S.

Can Tee fitting T, carbon steel, withstand corrosion in outdoor galvanized applications over long-term use?

Tee fitting T, carbon steel Format, galvanized (per DIN 2353) offers corrosion resistance suitable for many outdoor applications, but long-term performance depends on conditions. Hot-dip or electro-galvanized carbon steel provides a protective zinc layer that slows corrosion; in mild, non-aggressive environments (rural, low-saline atmospheres) it can perform well for years. In highly corrosive settings-coastal (salt spray), industrial atmospheres, continuous wetting, or where mechanical damage exposes base steel-the zinc coating will eventually corrode, risking rust and reduced integrity. For long-term outdoor use in aggressive conditions, consider stainless steel or additional protective measures (thicker/heavier galvanizing, paint/coatings, cathodic protection, regular maintenance). Choose series (LL/L/S) based on mechanical load; heavier series tolerates damage better, which also affects durability.

Does Tee fitting T, carbon steel, come with traceable material certificates for galvanized finishes?

Yes. Tee fitting T, carbon steel (DIN 2353, 24Â° socket with external metric threads; available LL, L, S; galvanized) can be supplied with traceable material certificates for the galvanized finish. Standard practice for carbon-steel hydraulic fittings intended for industrial use is to provide mill or material certificates (e.g., EN 10204/3.1 or 2.1) documenting base material chemistry and heat treatment. For galvanized finishes, an additional coating report or certificate indicating the galvanizing process and coating thickness (e.g., in Âµm) can be issued upon request. To ensure you receive traceable certificates, specify at order stage: - Required certificate type (EN 10204 3.1 preferred for full traceability). - Whether you need coating/galvanizing certificate details (process, thickness, adhesion testing). - Batch/heat number traceability and any inspection or testing requirements. Confirm availability and any extra cost or lead time with the supplier before ordering.

Tee fitting T, carbon steel

Additional information

Material	CS – steel (cast iron)

Fitting DIN 2353 tee, type T: 24° DIN 2353 socket with metric male thread. Available as: LL (extra-light series), L (series light), S (series heavy). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-T-04LL	Fitting DIN 2353 T 4LL	-	100	In stock	Enquiry
HD-T-06L	Fitting DIN 2353 T 6L	-	315	In stock	Enquiry
HD-T-06LL	Fitting DIN 2353 T 6LL	-	100	In stock	Enquiry
HD-T-06S	Fitting DIN 2353 T 6S	-	630	In stock	Enquiry
HD-T-08L	Fitting DIN 2353 T 8L	-	315	In stock	Enquiry
HD-T-08LL	Fitting DIN 2353 T 8LL	-	100	In stock	Enquiry
HD-T-08S	Fitting DIN 2353 T 8S	-	630	In stock	Enquiry
HD-T-10L	Fitting DIN 2353 T 10L	-	315	In stock	Enquiry
HD-T-10S	Fitting DIN 2353 T 10S	-	630	In stock	Enquiry
HD-T-12L	Fitting DIN 2353 T 12L	-	315	In stock	Enquiry
HD-T-12S	Fitting DIN 2353 T 12S	-	630	In stock	Enquiry
HD-T-14S	Fitting DIN 2353 T 14S	-	630	In stock	Enquiry
HD-T-15L	Fitting DIN 2353 T 15L	-	315	In stock	Enquiry
HD-T-16S	Fitting DIN 2353 T 16S	-	400	In stock	Enquiry
HD-T-18L	Fitting DIN 2353 T 18L	-	315	In stock	Enquiry
HD-T-20S	Fitting DIN 2353 T 20S	-	400	In stock	Enquiry
HD-T-22L	Fitting DIN 2353 T 22L	-	160	In stock	Enquiry
HD-T-25S	Fitting DIN 2353 T 25S	-	400	In stock	Enquiry
HD-T-28L	Fitting DIN 2353 T 28L	-	160	In stock	Enquiry
HD-T-30S	Fitting DIN 2353 T 30S	-	400	In stock	Enquiry
HD-T-35L	Fitting DIN 2353 T 35L	-	160	In stock	Enquiry
HD-T-38S	Fitting DIN 2353 T 38S	-	315	In stock	Enquiry
HD-T-42L	Fitting DIN 2353 T 42L	-	160	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting DIN 2353 tee, type T: 24° DIN 2353 socket with metric male thread. Available as: LL (extra-light series), L (series light), S (series heavy). Material: carbon steel, galvanized.