Is the DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 available with NBR elastomeric sealing in both L (light) and S (heavy) series?

Yes. The DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 is available with NBR elastomeric sealing in both L (light) and S (heavy) series. The product description specifies: Locking ring for 24Â° socket DIN 2353 with additional elastomeric sealing (NBR rubber). Available as: L (light series), S (heavy series). Material: hardened carbon steel, galvanized.

Can the DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 with NBR elastomeric sealing be used in corrosive environments?

The DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 with NBR elastomeric sealing offers basic corrosion resistance due to its galvanized finish, but it is not optimized for highly corrosive environments. Carbon steel-even hardened and galvanized-can corrode over time under aggressive conditions (salt spray, acidic or alkaline media, constant humidity). The NBR sealing provides good resistance to oils and some chemicals but has limited resistance to strong acids, solvents, and elevated temperatures. For occasional exposure to mild corrosive atmospheres the DU jam ring may be acceptable; for marine, chemical processing, or long-term harsh environments, choose stainless steel or specialized coatings and elastomers rated for those conditions.

Does the DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 with NBR sealing meet specific pressure ratings?

The DU jam ring, carbon steel locking ring for 24Â° socket DIN 2353 with NBR sealing does not include explicit pressure ratings in the provided description. The product description (locking ring with additional elastomeric NBR sealing; available in L. light series and S. heavy series; material: hardened carbon steel, galvanized) indicates design intent for sealing and mechanical retention, and the S (heavy) series will generally be suited to higher-stress applications than the L (light) series. However, specific working or burst pressure ratings depend on dimensions, mating components (fittings, tube/o-ring sizes), assembly method, and applicable standards. Therefore, you cannot assume precise pressure limits from this description alone. For definitive pressure ratings, request manufacturer data sheets, test certificates, or application tables that specify working and safety/burst pressures for the L and S variants with given tube/fitting sizes and operating conditions (temperature, media). If certification is required, ask for hydraulic pressure test results or compliance with relevant standards.

DU jam ring, carbon steel

Additional information

Locking ring for 24° socket DIN 2353 with additional elastomeric sealing (NBR rubber). Available as: L (light series), S (heavy series). Material: hardened carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-DU-06L	6 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-06S	6 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-08L	8 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-08S	8 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-10L	10 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-10S	10 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-12L	12 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-12S	12 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-14S	14 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-15L	15 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-16S	16 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-18L	18 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-20S	20 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-22L	22 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-25S	25 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-28L	28 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-30S	30 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-35L	35 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-38S	38 mm locking ring with NBR seal	-	-	In stock	Enquiry
HD-DU-42L	42 mm locking ring with NBR seal	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Locking ring for 24° socket DIN 2353 with additional elastomeric sealing (NBR rubber). Available as: L (light series), S (heavy series). Material: hardened carbon steel, galvanized.