Is DKOR hydraulic end, type ZBW120, carbon steel compatible with crimping sleeves specific to braided textile hoses?

Yes. The DKOR hydraulic end, type ZBW120, carbon steel is compatible with crimping sleeves specific to braided textile hoses. The product description states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose, and its construction (carbon steel, galvanized, internal BSP thread and nut, Oâring sealing on a 60Â° cone) supports standard crimping procedures for braided textile hose assemblies. Ensure you use a crimping sleeve matched to the hose diameter and specifications and follow the hose manufacturerâs crimping parameters.

Does DKOR hydraulic end, type ZBW120, carbon steel require a specific O-ring size for proper sealing?

Yes. DKOR hydraulic end, type ZBW120, carbon steel requires a specific O-ring size for proper sealing. It seals on a 60Â° cone (DKOR) with an internal BSP thread and nut; to achieve reliable sealing and avoid leaks you must use the O-ring size and cross-section specified for that 60Â° cone seat and the BSP connection. Using an incorrect O-ring diameter or thickness can cause poor seating, extrusion, or premature failure. Always refer to the manufacturerâs specification sheet or the hose fitting supplierâs recommended O-ring part number and dimensions for ZBW120 to ensure correct material (compatible with hydraulic fluid) and exact size.

DKOR hydraulic end, type ZBW120, carbon steel

Q: Can DKOR hydraulic end, type ZBW120, carbon steel be crimped with standard crimping sleeves for hydraulic and industrial hoses?

Yes. The DKOR hydraulic end, type ZBW120, carbon steel can be crimped with standard crimping sleeves intended for hydraulic and industrial hoses, provided the sleeve is compatible with the specific hose construction and dimensions. The component is described as a standard hydraulic end (type Z) with an internal BSP thread and nut, sealing on a 60Â° cone with an Oâring (DKOR), and specifically designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Ensure you match the sleeve size, hose series (e.g., R1/R2/EN853/EN857 etc.), and crimping parameters to the hose manufacturerâs specifications and use proper tooling to achieve correct crimp dimensions and a leakâtight, mechanically sound assembly. Also verify material compatibility (galvanized carbon steel) and pressure ratings for your application.

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW120-04-03	End. GW 1/4" BSP, hose 3/16", cone 60°, o-ring	5	-	In stock	Enquiry
TI-ZBW120-04-04	End. GW 1/4" BSP, hose 1/4", cone 60°, o-ring	6	-	In stock	Enquiry
TI-ZBW120-06-06	End. GW 3/8" BSP, hose 3/8", cone 60°, o-ring	10	-	In stock	Enquiry
TI-ZBW120-08-06	End. GW 1/2" BSP, hose 3/8", cone 60°, o-ring	10	-	In stock	Enquiry
TI-ZBW120-08-08	End. GW 1/2" BSP, hose 1/2", cone 60°, o-ring	12	-	In stock	Enquiry
TI-ZBW120-10-10	End. GW 5/8" BSP, hose 5/8", cone 60°, o-ring	16	-	In stock	Enquiry
TI-ZBW120-12-10	End. GW 3/4" BSP, hose 5/8", cone 60°, o-ring	16	-	In stock	Enquiry
TI-ZBW120-12-12	End. GW 3/4" BSP, hose 3/4", cone 60°, o-ring	20	-	In stock	Enquiry
TI-ZBW120-16-12	End. GW 1" BSP, hose 3/4", cone 60°, o-ring	20	-	In stock	Enquiry
TI-ZBW120-16-16	End. GW 1" BSP, hose 1", cone 60°, o-ring	25	-	In stock	Enquiry
TI-ZBW120-20-20	End. GW 1.1/4" BSP, hose 1.1/4", cone 60°, o-ring	32	-	In stock	Enquiry
TI-ZBW120-24-24	End. GW 1.1/2" BSP, hose 1.1/2", cone 60°, o-ring	38	-	In stock	Enquiry
TI-ZBW120-32-32	End. GW 2" BSP, hose 2", cone 60°, o-ring	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.