Can AGR-K hydraulic end, type ZBZ130, carbon steel, with external BSPT thread be sealed reliably with Teflon tape or liquid sealant instead of cone sealing?

Short answer: Yes, but with important caveats. AGR-K hydraulic end, type ZBZ130, carbon steel is designed to seal either on a 60Â° cone or by thread (external BSPT). BSPT is a tapered pipe thread that seals by metal-to-metal thread interference often aided by thread sealant (PTFE tape or liquid anaerobic/sealing compounds). For reliable service: - Use proper PTFE tape: wrap 3â5 turns of high-quality PTFE tape in the direction of the thread, avoid overwrapping, and keep tape clear of the first thread to prevent debris. Tape is acceptable for many hydraulic applications but is best for lower-pressure or static joints. - Liquid thread sealants: use a hydraulic-compatible, oil-resistant thread sealant rated for steel and the system pressure/temperature (e.g., anaerobic or pipe joint sealants specified for BSPT). Follow manufacturer cure times. - Inspect seat: because AGR-K can also be cone-sealed, verify the mating port is engineered for thread-only sealing. If the port expects cone sealing, relying solely on thread seal may not meet original design tolerances or pressures. - Pressure, vibration, and service fluid: for high pressure, pulsation, dynamic/rotating assemblies, and critical hydraulic systems, metal-to-metal cone sealing is generally more reliable and preferred. Thread sealants can creep or extrude under extreme conditions. - Assembly torque and compatibility: tighten to recommended torque for the size/material to ensure proper thread engagement without distortion. Ensure galvanization and sealant chemical compatibility. Conclusion: PTFE tape or appropriate liquid sealant can provide a reliable BSPT thread seal on the AGR-K hydraulic end, type ZBZ130, carbon steel for many applications, but for high-pressure, safety-critical, or where the mating port is intended for cone sealing, use the 60Â° cone or follow manufacturer/specification guidance.

Can AGR-K hydraulic end, type ZBZ130, carbon steel, with external BSPT thread be sealed reliably using only Teflon tape or liquid sealant?

Yes - AGR-K hydraulic end, type ZBZ130, carbon steel, with external BSPT thread can be reliably sealed using only PTFE (Teflon) tape or a suitable liquid thread sealant, provided correct application and hose assembly. BSPT is a tapered pipe thread that seals primarily on the threads; PTFE tape or pipe dope compatible with hydraulic oils will fill thread gaps and prevent leaks when applied properly (wrap 3â5 turns clockwise, avoid tape on first thread, or apply manufacturer-recommended liquid sealant). Note: AGR-K also offers possible sealing on the 60Â° cone - if your system relies on the cone face seal rather than thread-only sealing, use the cone seat and ensure proper mating surface and torque. Always follow hose/end manufacturer torque specs and use compatible sealants for hydraulic fluids and carbon-steel galvanizing.

Is AGR-K hydraulic end, type ZBZ130, carbon steel compatible with cone (60Â°) sealing and thread sealants?

Yes. AGR-K hydraulic end, type ZBZ130, carbon steel is compatible with 60Â° cone sealing and with thread sealants. The product description states it has external BSPT thread with sealing on the thread using Teflon tape or liquid sealant, and it also allows possible sealing on a 60Â° cone (AGR-K). It is designed for crimping in hydraulic and industrial hoses using a suitable crimping sleeve; material is carbon steel, galvanized.

AGR-K hydraulic end, type ZBZ130, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBZ130-02-03	End. GZ 1/8" BSPT, hose 3/16"	5	-	In stock	Enquiry
TI-ZBZ130-02-04	End. GZ 1/8" BSPT, hose 1/4"	6	-	In stock	Enquiry
TI-ZBZ130-04-03	End. GZ 1/4" BSPT, hose 3/16"	5	-	In stock	Enquiry
TI-ZBZ130-04-04	End. GZ 1/4" BSPT, hose 1/4"	6	-	In stock	Enquiry
TI-ZBZ130-04-05	End. GZ 1/4" BSPT, hose 5/16"	8	-	In stock	Enquiry
TI-ZBZ130-04-06	End. GZ 1/4" BSPT, hose 3/8"	10	-	In stock	Enquiry
TI-ZBZ130-06-04	End. GZ 3/8" BSPT, hose 1/4"	6	-	In stock	Enquiry
TI-ZBZ130-06-05	End. GZ 3/8" BSPT, hose 5/16"	8	-	In stock	Enquiry
TI-ZBZ130-06-06	End. GZ 3/8" BSPT, hose 3/8"	10	-	In stock	Enquiry
TI-ZBZ130-06-08	End. GZ 3/8" BSPT, hose 1/2"	12	-	In stock	Enquiry
TI-ZBZ130-08-06	End. GZ 1/2" BSPT, hose 3/8"	10	-	In stock	Enquiry
TI-ZBZ130-08-08	End. GZ 1/2" BSPT, hose 1/2"	12	-	In stock	Enquiry
TI-ZBZ130-08-10	End. GZ 1/2" BSPT, hose 5/8"	16	-	In stock	Enquiry
TI-ZBZ130-08-12	End. GZ 1/2" BSPT, hose 3/4"	20	-	In stock	Enquiry
TI-ZBZ130-10-10	End. GZ 5/8" BSPT, hose 5/8"	16	-	In stock	Enquiry
TI-ZBZ130-12-08	End. GZ 3/4" BSPT, hose 1/2"	12	-	In stock	Enquiry
TI-ZBZ130-12-10	End. GZ 3/4" BSPT, hose 5/8"	16	-	In stock	Enquiry
TI-ZBZ130-12-12	End. GZ 3/4" BSPT, hose 3/4"	20	-	In stock	Enquiry
TI-ZBZ130-16-12	End. GZ 1" BSPT, hose 3/4"	20	-	In stock	Enquiry
TI-ZBZ130-16-16	End. GZ 1" BSPT, hose 1"	25	-	In stock	Enquiry
TI-ZBZ130-20-16	End. GZ 1.1/4" BSPT, hose 1"	25	-	In stock	Enquiry
TI-ZBZ130-20-20	End. GZ 1.1/4" BSPT, hose 1.1/4"	32	-	In stock	Enquiry
TI-ZBZ130-24-20	End. GZ 1.1/2" BSPT, hose 1.1/4"	32	-	In stock	Enquiry
TI-ZBZ130-24-24	End. GZ 1.1/2" BSPT, hose 1.1/2"	38	-	In stock	Enquiry
TI-ZBZ130-32-32	End. GZ 2" BSPT, hose 2"	50	-	In stock	Enquiry
TI-ZBZ130-40-40	End. GZ 2.1/2" BSPT, hose 2.1/2"	65	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.