Can Body for BANJO twist-on fitting, type D5 be used with soft plastic hoses at 18 bar working pressure and secured by the D7âD10 through bolts?

Yes. Body for BANJO twist-on fitting, type D5 is designed for soft-plastic hoses and uses a push-on hose with a screw-on nut to secure the connection. The angle body allows orientation adjustment, the material is nickelâplated brass, and the specified working pressure is 18 bar. It is intended to be used with the listed through bolts (D7âD10) for mounting the body. Therefore, using Body for BANJO twist-on fitting, type D5 with soft plastic hoses at 18 bar and securing the assembly by the D7âD10 through bolts is appropriate, provided the hose OD/ID and nut dimensions match the D5 fitting specifications and installation follows proper torque and hose clamp practices.

Can Body for BANJO twist-on fitting, type D5 be oriented using its angle body while secured to soft plastic hoses with D7âD10 through bolts?

Yes. Body for BANJO twist-on fitting, type D5 can be oriented using its angle body while secured to soft plastic hoses with through bolts D7âD10. The twist-on D5 socket attaches the hose by pushing it onto the fitting and tightening the nut; the angled body permits setting the connectorâs rotation to the required orientation. Using the specified through bolts (D7âD10) to fasten the angle body to the assembly is compatible with the nickel-plated brass construction and the stated working pressure (18 bar), provided bolts and hose clamps are correctly installed and rated for the pressure and hose material.

Is Body for BANJO twist-on fitting, type D5 suitable for soft plastic hoses tightened with a screw-on nut?

Yes. Body for BANJO twist-on fitting, type D5 is suitable for soft plastic hoses tightened with a screw-on nut. The product description explicitly states it is intended for hoses made of soft plastics and that the connection is made by inserting the hose onto the fitting and tightening it by screwing on the nut. The angled body also allows positioning the connector in the desired orientation. Material (nickel-plated brass) and working pressure (18 bar) indicate adequate durability and pressure rating for typical soft-plastic hose applications; ensure the hose inner diameter matches the D5 socket and that bolts (D7âD10) and nut are properly tightened to achieve a secure seal.

Body for BANJO screw-together fitting, type D5

All products, Banjo fittings/

Additional information

Material	B – brass (bronze)

Angled body of the BANJO coupling with a push-on connection, type D5, intended for hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. The angled body of the BANJO coupling allows the coupling to be set in the desired position. Through-bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2405000	Angled fitting BANJO D5, push-on, hose 4/2, for bolt M5	-	18	In stock	Enquiry
MW-2405001	Angled fitting BANJO D5, push-on, hose 6/4, for bolt M5	-	18	In stock	Enquiry
MW-2405002	Angled fitting BANJO D5, push-on, hose 6/4, for bolt BSP 1/8"	-	18	In stock	Enquiry
MW-2405003	Angled fitting BANJO D5, push-on, hose 6/4, for bolt BSP 1/4"	-	18	In stock	Enquiry
MW-2405005	Angled fitting BANJO D5, push-on, hose 8/6, for bolt BSP 1/8"	-	18	In stock	Enquiry
MW-2405006	Angled fitting BANJO D5, push-on, hose 8/6, for bolt BSP 1/4"	-	18	In stock	Enquiry
MW-2405007	Angled fitting BANJO D5, push-on, hose 8/6, for bolt BSP 3/8"	-	18	In stock	Enquiry
MW-2405009	Angled fitting BANJO D5, push-on, hose 10/8, for bolt BSP 1/4"	-	18	In stock	Enquiry
MW-2405010	Angled fitting BANJO D5, push-on, hose 10/8, for bolt BSP 3/8"	-	18	In stock	Enquiry
MW-2405011	Angled fitting BANJO D5, push-on, hose 10/8, for bolt BSP 1/2"	-	18	In stock	Enquiry
MW-2405012	Angled fitting BANJO D5, push-on, hose 12/10, for bolt BSP 1/2"	-	18	In stock	Enquiry
MW-2405013	Angled fitting BANJO D5, push-on, hose 5/3, for bolt BSP 1/8"	-	18	In stock	Enquiry
MW-2405017	Angled fitting BANJO D5, push-on, hose 12/10, for bolt BSP 3/8"	-	18	In stock	Enquiry
MW-2405018	Angled fitting BANJO D5, push-on, hose 5/3, for bolt M5	-	18	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Angled body of the BANJO coupling with a push-on connection, type D5, intended for hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. The angled body of the BANJO coupling allows the coupling to be set in the desired position. Through-bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.