Is the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel suitable for outdoor use and resistant to UV, water, and temperature variations?

Yes. The DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel is suitable for outdoor use and resistant to UV, water, and temperature variations. Reason: the steel strip is galvanized carbon steel (W1) for corrosion resistance, and the flange is made of EPDM rubber, a material specifically noted for resistance to water, abrasion, temperature changes, and aging (including good UV resistance). The clamp is designed for demanding applications (agricultural and construction machinery, engine and railway use), which supports its suitability for outdoor, variable-temperature, and moisture-exposed environments. Note: fasteners (screw, washer, nut) are not included, so choose corrosion-resistant hardware (e.g., stainless steel) for best long-term outdoor performance.

Can the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel be used for securing fuel and hydraulic hoses in high-vibration environments?

Yes. The DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel is suitable for securing fuel and hydraulic hoses in high-vibration environments. It is designed for safe, vibration-damping installation of hoses and hose bundles, uses a single bent galvanized carbon steel strip with reinforced holes to resist compression under high mechanical loads, and features an EPDM rubber flange that provides abrasion protection and resistance to water, temperature changes and aging. Note: the clamp is supplied without screw, washer or nut, so use appropriate fasteners and correct tightening to ensure secure mounting.

How do I install the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel correctly without a screw or nut?

To install the DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel correctly without a screw or nut, postÄpuj tak: 1. Wybierz odpowiednie miejsce montaÅ¼u: powierzchnia musi byÄ pÅaska, noÅna i czysta; uwzglÄdnij dostÄp serwisowy i kierunek drgaÅ. 2. OwiÅ element (pipe, hose, przewÃ³d) gumowÄ czÄÅciÄ (EPDM) wewnÄtrz okrÄgÅego profilu P-CLIP tak, aby element leÅ¼aÅ centralnie w gumowej tulei. 3. Dopasuj koÅce stalowej taÅmy: zÅÃ³Å¼ klocek tak, by otwory na obu koÅcach taÅmy byÅy zbieÅ¼ne; stalowe pÅytki wzmacniajÄce powinny znajdowaÄ siÄ na zewnÄtrznych stronach otworÃ³w. 4. Zabezpieczenie bez Åruby: uÅ¼yj odpowiedniego zÅÄcza mocujÄcego pasujÄcego do otworÃ³w w taÅmie (np. karbowanego bolca, zawleczki, spinek montaÅ¼owych, specjalnych nitÃ³w rozprÄÅ¼nych lub uchwytÃ³w klinowych) dobranego do gruboÅci i Årednicy otworÃ³w oraz warunkÃ³w pracy. Wybierz element montaÅ¼owy wykonany ze stali lub innego materiaÅu odpornego na korozjÄ. 5. MontaÅ¼ elementu mocujÄcego: przeÅÃ³Å¼ wybrany zatrzask/bolc przez otwory taÅmy i przez podÅoÅ¼e (np. blacha, otwÃ³r montaÅ¼owy); dokrÄÄ lub zaciÅnij zgodnie z instrukcjÄ producenta uÅ¼ytego zÅÄcza, zapewniajÄc pewne, ale nie nadmierne dociÅniÄcie (guma ma tÅumiÄ drgania). 6. Kontrola i regulacja: sprawdÅº, czy przewÃ³d jest stabilny, gumowa wkÅadka rÃ³wnomiernie obejmuje element, a taÅma nie jest skrÄcona. Upewnij siÄ, Å¼e element montujÄcy nie powoduje punktowego przecisku gumy. 7. Warunki eksploatacji: uÅ¼yj montaÅ¼u nierdzewnego lub zabezpieczonego antykorozyjnie w Årodowiskach agresywnych; okresowo kontroluj stan gumy EPDM i mocowania pod kÄtem zuÅ¼ycia, pÄkniÄÄ lub poluzowania. Uwaga: DIN 3016 mounting clamp RUBBER P-CLIP, strap width 15 mm, carbon steel nie zawiera Åruby ani nakrÄtki. dobierz odpowiedni typ i rozmiar zÅÄcza montaÅ¼owego zgodnie z zastosowaniem i obciÄÅ¼eniem.

A clamp assembly DIN 3016 RUBBER P-CLIP, width tape 15 mm, steel carbon

Additional information

Material	CS – steel (cast iron)
Standard length [m]	60

A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 15 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03004656	Clamp RUBBER P-CLIP 5 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004664	Clamp RUBBER P-CLIP 6 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004680	Clamp RUBBER P-CLIP 8 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004701	Clamp RUBBER P-CLIP 10 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004710	Clamp RUBBER P-CLIP 11 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004728	Clamp RUBBER P-CLIP 12 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004736	Clamp RUBBER P-CLIP 13 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004744	Clamp RUBBER P-CLIP 14 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004752	Clamp RUBBER P-CLIP 15 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004760	Clamp RUBBER P-CLIP 16 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004779	Clamp RUBBER P-CLIP 17 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004787	Clamp RUBBER P-CLIP 18 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004795	Clamp RUBBER P-CLIP 19 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004808	Clamp RUBBER P-CLIP 20 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004816	Clamp RUBBER P-CLIP 21 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004824	Clamp RUBBER P-CLIP 22 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004832	Clamp RUBBER P-CLIP 23 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004859	Clamp RUBBER P-CLIP 25 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004867	Clamp RUBBER P-CLIP 26 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004883	Clamp RUBBER P-CLIP 28 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004904	Clamp RUBBER P-CLIP 30 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004920	Clamp RUBBER P-CLIP 32 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004939	Clamp RUBBER P-CLIP 33 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004947	Clamp RUBBER P-CLIP 34 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004955	Clamp RUBBER P-CLIP 35 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004963	Clamp RUBBER P-CLIP 36 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004971	Clamp RUBBER P-CLIP 37 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03004980	Clamp RUBBER P-CLIP 38 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005000	Clamp RUBBER P-CLIP 40 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005034	Clamp RUBBER P-CLIP 43 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005050	Clamp RUBBER P-CLIP 45 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005077	Clamp RUBBER P-CLIP 47 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005106	Clamp RUBBER P-CLIP 50 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005122	Clamp RUBBER P-CLIP 52 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005165	Clamp RUBBER P-CLIP 56 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005202	Clamp RUBBER P-CLIP 60 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005253	Clamp RUBBER P-CLIP 65 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005341	Clamp RUBBER P-CLIP 74 mm, width 15 mm, W1	-	-	In stock	Enquiry
AB-03005405	Clamp RUBBER P-CLIP 80 mm, width 15 mm, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 15 mm.