Can Suction - delivery industrial hose for water TORONTO LIGHTÂ® handle abrasive sludges and solids without reducing its service life?

Yes. Suction - delivery industrial hose for water TORONTO LIGHTÂ® is designed to handle abrasive sludges and solids while maintaining service life. Its construction.black SBR rubber inner and outer layers combined with synthetic cord reinforcement and a steel spiral.provides good abrasion resistance, mechanical strength and structural support under vacuum and pressure. The hose is intended for industrial water, sewage and sludges, so it tolerates non-corrosive abrasive media encountered in pumping applications in industry, construction and agriculture. Limitations: very aggressive abrasives, sharp solids or prolonged heavy abrasion will still wear the inner lining faster than clean water; service life depends on particle size, concentration, flow velocity, and duty cycle. Working pressures (5â10 bar) and vacuum rating (0.9 bar), plus operating temperatures (â30Â°C to +70Â°C), define appropriate operating conditions. For extreme abrasion or highly concentrated solids consider heavier-duty hoses or protective measures and consult Tubes International for application-specific recommendations and longer lengths (120 m option).

Is Suction - delivery industrial hose for water TORONTO LIGHTÂ® suitable for continuous use with non-corrosive chemical solutions?

Suction - delivery industrial hose for water TORONTO LIGHTÂ® is designed for transfer of industrial water, sewage, sludges and nonâcorrosive liquids. Given its construction (black SBR rubber inner and outer layers, synthetic cord and steel spiral reinforcement) and stated use for nonâcorrosive liquids, it is suitable for continuous use with nonâcorrosive chemical solutions that are compatible with SBR rubber. Ensure the chemicals do not degrade SBR, and verify temperature (-30Â°C to +70Â°C), working pressure (5â10 bar depending on diameter) and vacuum (0.9 bar) limits for your application. For prolonged or critical chemical service, consult Tubes International or perform material compatibility testing.

Can Suction - delivery industrial hose for water TORONTO LIGHTÂ® be used with diesel or oil-based fluids?

No. Suction - delivery industrial hose for water TORONTO LIGHTÂ® is designed for transfer of industrial water, sewage, sludges and other non-corrosive, predominantly water-based liquids. Its construction (black SBR rubber inner and outer layers, synthetic cord and steel spiral reinforcement) and specification do not indicate chemical compatibility with diesel or oil-based fluids. Oils and diesel can swell, soften or degrade SBR rubber, compromise seals and fittings, and shorten hose life or cause failure. For diesel or oil transfer, use a hose specifically rated for petroleum products with compatible inner lining and appropriate certifications. If you must consider TORONTO LIGHTÂ® for such use, consult the manufacturer for compatibility data and a written confirmation.

Suction – delivery industrial hose for water TORONTO LIGHT®

Air and water hoses, All products/

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	60, 60 / 120
Reinforcement	steel spiral, synthetic cover

Suction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-TORONTO-L-019	Hose TORONTO LIGHT 19x27 mm	20	10	In stock	Enquiry
IV-TORONTO-L-025	TORONTO LIGHT hose 25x33 mm	25	10	In stock	Enquiry
IV-TORONTO-L-032	TORONTO LIGHT hose 32x40 mm	32	10	In stock	Enquiry
IV-TORONTO-L-038	TORONTO LIGHT hose 38x47.5 mm	38	10	In stock	Enquiry
IV-TORONTO-L-040	TORONTO LIGHT hose 40x49.5 mm	40	10	In stock	Enquiry
IV-TORONTO-L-051	TORONTO LIGHT hose 51x60.5 mm	50	10	In stock	Enquiry
IV-TORONTO-L-060	TORONTO LIGHT hose 60x71 mm	60	10	In stock	Enquiry
IV-TORONTO-L-063	TORONTO LIGHT hose 63.5x75 mm	65	10	In stock	Enquiry
IV-TORONTO-L-070	Hose TORONTO LIGHT 70x81 mm	70	10	In stock	Enquiry
IV-TORONTO-L-076	Hose TORONTO LIGHT 76x87 mm	75	10	In stock	Enquiry
IV-TORONTO-L-090	Hose TORONTO LIGHT 90x102 mm	90	10	In stock	Enquiry
IV-TORONTO-L-102	TORONTO LIGHT hose 102x114 mm	100	10	In stock	Enquiry
IV-TORONTO-L-110	Hose TORONTO LIGHT 110x125 mm	110	10	In stock	Enquiry
IV-TORONTO-L-127	HOSE TORONTO LIGHT 127x143 mm	125	10	In stock	Enquiry
IV-TORONTO-L-152	Hose TORONTO LIGHT 152x170.5 mm	150	10	In stock	Enquiry
IV-TORONTO-L-203	Hose TORONTO LIGHT 203x225 mm	200	10	In stock	Enquiry
IV-TORONTO-L-254	TORONTO LIGHT hose 254x278 mm	250	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Suction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	60, 60 / 120
Reinforcement	steel spiral, synthetic cover