Is PENETRATOR 5 WAY PLUS lubricant safe for use on sensitive electrical contacts and will it leave any residue that affects conductivity?

PENETRATOR 5 WAY PLUS lubricant is designed for precision devices and specifically lists removing moisture and drying electrical equipment among its uses, so it is suitable for use on sensitive electrical contacts for dewatering and corrosion protection. Because it provides very good penetration and lubrication while removing minor contaminants, it can help restore contact performance and prevent short-term corrosion-related issues. The description also states it does not contain silicones, which reduces the risk of insulating residue that can impair conductivity. However, any lubricant can leave some residue depending on formulation and amount applied. For critical or high-frequency contacts, apply sparingly, allow thorough evaporation/drying, and if necessary wipe excess with a clean lint-free cloth. If absolute zero-residue is required (e.g., precision electronics or signal contacts), test on a small area first or consider a designated no-residue contact cleaner.

Can PENETRATOR 5 WAY PLUS lubricant be used to prevent corrosion on stored precision instruments without harming plastics or coatings?

Based on the product description, PENETRATOR 5 WAY PLUS lubricant is formulated for precision devices, offering penetration, lubrication, dewatering and corrosion protection. Itâs intended for removing moisture, drying electrical equipment, loosening rusted fasteners and cleaning minor contaminants. The description also notes it contains no silicones and comes in 500 ml packaging. However, the description does not explicitly state compatibility with all plastics or coatings. While the formula is aimed at precision instruments and likely safe for many metal components and common finishes, you cannot assume universal compatibility. Before long-term use on stored precision instruments with plastic parts or specialized coatings, test PENETRATOR 5 WAY PLUS on a small, inconspicuous area or consult the manufacturerâs technical data sheet to confirm it wonât cause swelling, crazing, discoloration or damage.

Can PENETRATOR 5 WAY PLUS lubricant be used to displace water from submerged connectors and restore full function?

Based on the product description, PENETRATOR 5 WAY PLUS lubricant can help displace moisture from submerged connectors and assist in restoring function in some cases, but with important limitations. Why it can help: - The description states it provides dewatering and is used for removing moisture and drying electrical equipment, so it can repel water from contacts and speed drying. - It also offers corrosion protection and lubrication, which can improve contact continuity and prevent further deterioration after drying. Limitations and cautions: - The description does not guarantee safe use on fully submerged, sealed, or high-voltage connectors; effectiveness depends on extent of water ingress, contaminants, and connector design. - It does not state dielectric properties or that it is specifically formulated as an electrical contact cleaner/replacement for immersion; some lubricants can leave residues that impair high-frequency or precise electrical contacts. - For submerged connectors with corrosion, mineral deposits, or long-term water exposure, mechanical cleaning, drying, or replacement may be required. - Always power down equipment before application, test on a small area or noncritical connector first, and consult equipment manufacturer recommendations. Practical recommendation: Use PENETRATOR 5 WAY PLUS lubricant as a dewatering and corrosion-inhibiting aid for damp or lightly water-exposed connectors, but do not rely on it as a guaranteed fix for fully submerged or heavily corroded connectors. inspect, dry, and replace components if necessary.

Grease PENETRATOR 5 WAY PLUS

All products, Oils and greases/

Additional information

Excellent grease for precision equipment. ensures very good penetration, lubrication, demoisturising, protection against corrosion. used for: removing moisture and drying equipment electric, unscrewing rusted bolts, nuts, removing fine contaminants with metal parts. Not contains silicones. Packaging – 500 ml.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AZ-PENETRATOR	Smar PENETRATOR 5 WAY PLUS (500 ml)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Excellent grease for precision equipment. ensures very good penetration, lubrication, demoisturising, protection against corrosion. used for: removing moisture and drying equipment electric, unscrewing rusted bolts, nuts, removing fine contaminants with metal parts. Not contains silicones. Packaging – 500 ml.