Is the Multi-output distribution strip with 1/8" outputs, aluminum compatible with both 1/4" BSP compressors and 1/8" BSP pneumatic fittings at 12 bar?

Yes. The Multi-output distribution strip with 1/8" outputs, aluminum is compatible with a compressor having a 1/4" BSP outlet and with pneumatic fittings that use 1/8" BSP threads, provided you make the following connections correctly: - Inlet: the rail has a 1/4" BSP internal thread, so it will accept a 1/4" BSP male fitting from your compressor (ensuring a proper seal with appropriate tape or sealant). - Outlets: the railâs outlets are 1/8" BSP internal threads, so standard 1/8" BSP pneumatic fittings will screw directly into them. The strip is rated for a working pressure of 12 bar and an operating temperature range of -10Â°C to +80Â°C, matching your specified pressure. Ensure proper sealing and mounting; use compatible BSP-threaded fittings and recommended sealant for safe, leak-free operation.

Can the Multi-output distribution strip with 1/8" outputs, aluminum be mounted horizontally or vertically without affecting airflow or pressure?

Multi-output distribution strip with 1/8" outputs, aluminum can be mounted either horizontally or vertically without affecting airflow or pressure, provided the installation uses the provided securing holes and the connected piping is properly sized and sealed. The device is a passive manifold (anodized aluminum, 1/4" BSP inlet, 1/8" BSP outlets, working pressure 12 bar, -10Â°C to +80Â°C), so orientation does not change internal flow characteristics or pressure distribution. Ensure outlets are not obstructed, avoid sharp bends or restrictive fittings immediately at the ports, and secure the rail to prevent vibration or stress on connections.

Does the Multi-output distribution strip with 1/8" outputs, aluminum require thread sealant for 1/4" BSP inlet and 1/8" BSP outlets?

Multi-output distribution strip with 1/8" outputs, aluminum. does it require thread sealant for 1/4" BSP inlet and 1/8" BSP outlets? Yes. Although the product description lists internal threads (1/4" BSP inlet, 1/8" BSP outlets) and anodized aluminum body, BSP (British Standard Pipe) threads are parallel (BSPP) or tapered (BSPT). Internal threads in distribution rails are typically BSPP, which require a sealing washer or an O-ring on the male fitting to achieve a pressure-tight joint; BSPP-to-BSPP metal threads alone do not seal. If the mating fittings are BSPT (tapered), thread sealant (PTFE tape or liquid thread sealant) is normally used to create a pressure-tight seal. Practical guidance: - Verify whether the mating fittings are BSPP or BSPT. - If mating to BSPP male fittings that include an appropriate sealing face or O-ring, you may not need additional tape; use the specified sealing washer/O-ring. - If mating to BSPP metal fittings without a dedicated sealing face or to BSPT fittings, use PTFE tape or an appropriate anaerobic thread sealant rated for compressed air and the operating temperature range (-10Â°C to +80Â°C). - Apply sealant compatible with aluminum and with working pressure up to 12 bar. When in doubt, consult the fitting manufacturer or installer to confirm thread types and recommended sealing method.

Multi-output distribution manifold with 1/8″ outlets, aluminum

Accessories for pneumatic fittings, All products/

Additional information

Material	AL – aluminum

Multi-output distribution manifold with 1/8″ outlets for use in pneumatic systems, allowing pressurized compressed air to be split into several branches. It has additional holes for fixing it at the desired point of the installation. Inlet – 1/4″ BSP female threads, outlet – 1/8″ BSP female threads. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0502111005	Distribution manifold, 2 x inlet 1/4" BSP female, 3 x outlet 1/8" BSP female, aluminum	-	12	In stock	Enquiry
MW-W0502111007	Distribution manifold, 2 x inlet 1/4" BSP female, 4 x outlet 1/8" BSP female, aluminum	-	12	In stock	Enquiry
MW-W0502111009	Distribution manifold, 2 x inlet 1/4" BSP female, 5 x outlet 1/8" BSP female, aluminum	-	12	In stock	Enquiry
MW-W0502111011	Distribution manifold, 2 x inlet 1/4" BSP female, 6 x outlet 1/8" BSP female, aluminum	-	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Multi-output distribution manifold with 1/8″ outlets for use in pneumatic systems, allowing pressurized compressed air to be split into several branches. It has additional holes for fixing it at the desired point of the installation. Inlet – 1/4″ BSP female threads, outlet – 1/8″ BSP female threads. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.