Is the Foam generator LS 3 compatible with industry-standard pressure vessels for touchless washing up to 180 bar and 60Â°C?

Yes. The Foam generator LS 3 is designed for pressure devices used in touchless washing and is compatible with industry-standard pressure vessels within the specified limits. Its 1 l polyethylene tank with brass injector (nozzle diameter 1.25 mm) supports a working pressure up to 180 bar, a maximum flow rate of 20 l/min, and an operating temperature up to +60Â°C, matching the stated vessel requirements. Ensure the vesselâs fittings, material compatibility, and connector sizes match the Foam generator LS 3âs ports before installation.

Can Foam generator LS 3 operate safely with a 1â¯L polyethylene tank and brass injector at 180â¯bar and 60â¯Â°C?

Foam generator LS 3 Format with a 1 L polyethylene tank and brass injector at 180 bar and 60 Â°C raises safety concerns. Polyethylene has limited longâterm strength at elevated temperatures and under very high pressure; a small 1 L plastic tank is unlikely rated for 180 bar (typical PE tanks are for lowâpressure use). Brass injector and 1.25 mm nozzle can handle high pressure, but the interface between brass and PE and the tankâs fittings may fail under 180 bar and 60 Â°C. Unless the specific tank and all fittings are explicitly certified by the manufacturer for 180 bar and 60 Â°C service, operation is not safe. Recommended: use a metal (pressureârated) container or confirm manufacturer certification and pressure/temperature ratings before operating.

Can Foam generator LS 3 deliver foam at up to 20â¯L/min through a 1.25â¯mm nozzle at 180â¯bar and 60â¯Â°C?

Yes. Foam generator LS 3 can deliver foam at up to 20 L/min through a 1.25 mm nozzle at 180 bar and 60 Â°C. The product description lists a 1.25 mm nozzle diameter, a working pressure of 180 bar, a maximum flow rate of 20 L/min, and an operating temperature of +60 Â°C, so those specifications match and indicate the unit is designed to operate under those exact conditions.

Foam generator LS 3

All products, Guns for high-pressure washers/

Additional information

The LS 3 foam generator for pressure devices, intended for touchless washing. A 1 l polyethylene tank is equipped with a brass injector for generating foam. Diameter nozzle: 1.25 mm. Working pressure: 180 bar. max. Flow rate: 20 l/min. Operating temperature: +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-140269	Wytwornica foam 180 bar, connection 1/4" BSP female	-	180	In stock	Enquiry
MH-140275	Wytwornica foam 180 bar, connection plug quick coupling 250 bar	-	180	In stock	Enquiry
MH-140282	Wytwornica foam 180 bar, connection plug quick coupling 400 bar	-	180	In stock	Enquiry
MH-140286	Wytwornica foam 180 bar, connection M22x1.5 male	-	180	In stock	Enquiry
MH-140288	Wytwornica foam 180 bar, connection plug quick coupling 350 bar.	-	180	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The LS 3 foam generator for pressure devices, intended for touchless washing. A 1 l polyethylene tank is equipped with a brass injector for generating foam. Diameter nozzle: 1.25 mm. Working pressure: 180 bar. max. Flow rate: 20 l/min. Operating temperature: +60°C.