Is the HYDROJET nozzle for lances, stainless steel compatible with GZ 1/4" NPT fittings and safe to use up to 280 bar working pressure?

Yes. The HYDROJET nozzle for lances, stainless steel is compatible with GZ 1/4" NPT fittings and is rated safe for use up to 280 bar working pressure. The product specification lists its connection as GZ 1/4" NPT and its working pressure as up to 280 bar, with stainless steel construction suitable for highâpressure applications.

Can the HYDROJET nozzle for lances, stainless steel withstand abrasive fluids and still operate safely at up to 280 bar?

Yes. The HYDROJET nozzle for lances, stainless steel is constructed from stainless steel and rated for working pressures up to 280 bar, so it can operate safely at that pressure. However, resistance to abrasive fluids depends on the specific stainless steel grade and the severity of abrasion (particle hardness, concentration, flow velocity, temperature). For moderate abrasion and proper maintenance the HYDROJET nozzle for lances, stainless steel should perform adequately; for heavy, highly abrasive fluids a harder-wearing material or specialized abrasion-resistant coating may be required to ensure long-term safety and service life.

Does the HYDROJET nozzle for lances, stainless steel require special torque or sealing for GZ 1/4" NPT at 280 bar?

No special torque or sealing beyond standard stainless-steel NPT practice is typically required for the HYDROJET nozzle for lances, stainless steel at 280 bar. but follow best practices and verify with supplier documentation. Explanation and practical guidance: - Connection type: GZ 1/4" NPT (a tapered NPT male/female thread) relies on thread interference plus a sealant to achieve a leak-tight joint at high pressure. NPT is commonly used up to and beyond 280 bar when installed correctly. - Torque: Use recommended torque values for 1/4" stainless steel NPT fittings from the nozzle or lance manufacturer (if provided). If no specific value is given, apply controlled hand-tight plus a measured additional turns (typical practice: wrench tighten 1â2 turns beyond hand-tight for small NPT connections) while avoiding over-torquing which can damage threads or the nozzle body, especially in stainless steel. - Sealing: Use an appropriate thread sealant compatible with stainless steel and the fluid/media and rated for >280 bar. Common options: - PTFE tape (carefully applied, 2â3 wraps, avoid tape entering flow path) - Liquid anaerobic pipe sealant rated for high pressure - High-performance pipe dope specified for high-pressure stainless connections Avoid using just dry threads. For critical or safetyâsensitive systems, choose sealants certified for the working pressure and temperature range. - Assembly tips: - Clean threads of debris and burrs before assembly. - Use a backup wrench to avoid stressing the nozzle body. - Hand-start threads to prevent cross-threading. - Inspect for leaks at pressure using appropriate testing procedures. - Verification: Always confirm with HYDROJET nozzle for lances, stainless steel product documentation or supplier technical support for any model-specific torque/sealant recommendations and for any warranty or safety requirements. If you want, I can provide suggested torque ranges and specific sealant product examples based on typical 1/4" stainless NPT practice.

Nozzle HYDROJET for lances, steel stainless

All products, Guns for high-pressure washers/

Additional information

Nozzle HYDROJET for lances. Material: steel stainless. Connection: 1/4″ NPT male. Working pressure: up to 280 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-170216	Nozzle kal. 03 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170217	Nozzle kal. 03 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170218	Nozzle kal. 03 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170219	Nozzle kal. 03 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170224	Nozzle kal. 04 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170225	Nozzle kal. 04 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170226	Nozzle kal. 04 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170227	Nozzle kal. 04 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170228	Nozzle kal. 045 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170229	Nozzle kal. 045 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170230	Nozzle kal. 045 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170231	Nozzle kal. 045 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170232	Nozzle kal. 05 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170233	Nozzle kal. 05 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170234	Nozzle kal. 05 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170235	Nozzle kal. 05 with 1/4" NPT male, 40°	-	140	In stock	Enquiry
MH-170236	Nozzle kal. 055 with 1/4" NPT male, 0°	-	80	In stock	Enquiry
MH-170237	Nozzle kal. 055 with 1/4" NPT male, 15°	-	80	In stock	Enquiry
MH-170238	Nozzle kal. 055 with 1/4" NPT male, 25°	-	80	In stock	Enquiry
MH-170239	Nozzle kal. 055 with 1/4" NPT male, 40°	-	80	In stock	Enquiry
MH-170240	Nozzle kal. 06 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170241	Nozzle kal. 06 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170242	Nozzle kal. 06 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170243	Nozzle kal. 06 with 1/4" NPT male, 40°	-	140	In stock	Enquiry
MH-170244	Nozzle kal. 065 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170245	Nozzle kal. 065 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170246	Nozzle kal. 065 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170602	Nozzle kal. 07 with 1/4" NPT male, 0°	-	100	In stock	Enquiry
MH-170603	Nozzle kal. 07 with 1/4" NPT male, 15°	-	100	In stock	Enquiry
MH-170604	Nozzle kal. 07 with 1/4" NPT male, 25°	-	100	In stock	Enquiry
MH-170605	Nozzle kal. 07 with 1/4" NPT male, 40°	-	100	In stock	Enquiry
MH-170606	Nozzle kal. 075 with 1/4" NPT male, 0°	-	80	In stock	Enquiry
MH-170607	Nozzle kal. 075 with 1/4" NPT male, 15°	-	80	In stock	Enquiry
MH-170608	Nozzle kal. 075 with 1/4" NPT male, 25°	-	80	In stock	Enquiry
MH-170609	Nozzle kal. 075 with 1/4" NPT male, 40°	-	80	In stock	Enquiry
MH-170610	Nozzle kal. 08 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170611	Nozzle kal. 08 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170612	Nozzle kal. 08 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170626	Nozzle kal. 10 with 1/4" NPT male, 0°	-	100	In stock	Enquiry
MH-170627	Nozzle kal. 10 with 1/4" NPT male, 15°	-	100	In stock	Enquiry
MH-170628	Nozzle kal. 10 with 1/4" NPT male, 25°	-	100	In stock	Enquiry
MH-170629	Nozzle kal. 10 with 1/4" NPT male, 40°	-	100	In stock	Enquiry