Is the Lance nozzle, stainless steel compatible with GZ 1/4" NPT fittings and safe to use at working pressures up to 350 bar?

Yes. The Lance nozzle, stainless steel is compatible with GZ 1/4" NPT fittings and is rated for use at working pressures up to 350 bar. Its material (stainless steel) and specified connection (GZ 1/4" NPT) indicate proper matching with that thread type, and the listed working pressure rating confirms it is safe for operation up to 350 bar when installed and used according to manufacturer guidelines and applicable safety standards.

Can Lance nozzle, stainless steel withstand continuous operation at pressures up to 350 bar with GZ 1/4" NPT connection?

Yes. Lance nozzle, stainless steel with a GZ 1/4" NPT connection is rated for working pressures up to 350 bar and-if manufactured and installed per specifications-can withstand continuous operation at pressures up to 350 bar. Ensure proper installation torque, compatible mating fittings, correct thread sealing, and that the nozzle and system are free of damage or corrosion. Verify operating temperature limits, dynamic loads, and applicable safety factors; if used in critical or cyclic/high-vibration service, consult the manufacturer or provide additional pressure testing/certification to confirm long-term suitability.

Does the Lance nozzle, stainless steel meet safety standards for use at 350 bar with GZ 1/4" NPT?

Based on the provided description for Lance nozzle, stainless steel. Material: stainless steel. Connection: GZ 1/4" NPT. Working pressure: up to 350 bar. the nozzle is specified for operation up to 350 bar, which indicates it is designed to withstand that pressure in normal use. However, confirming that it "meets safety standards" for use at 350 bar with a GZ 1/4" NPT connection requires additional verification beyond the basic spec: - Material suitability: Stainless steel is commonly used for high-pressure components and can be suitable at 350 bar, but grade and heat treatment matter (e.g., 304 vs 316; tensile strength and toughness). - Connection compatibility: GZ 1/4" NPT (British/metric designation vs NPT) must be the correct thread type and rated for the pressure; improper thread matching or poor sealing can cause leaks or failures. - Standards and certification: Compliance with applicable standards (e.g., EN, ISO, ASME, PED for pressure equipment in the EU, or relevant national codes) and presence of pressure-testing/certification (e.g., hydrostatic test, traceable material certificates) is required to claim safety compliance. - Safety margins and application factors: Working pressure rating should include a safety factor and be compared to system maximum operating pressure; transient spikes, cyclic loading, erosion, corrosion, and temperature effects can reduce safe operating capability. - Installation and maintenance: Proper installation, correct torque, sealing method (tape, gasket, thread sealant), and regular inspection are necessary for safe operation at high pressure. Conclusion: The printed working pressure "up to 350 bar" indicates the Lance nozzle, stainless steel is intended for use at that pressure, but you cannot assume full compliance with all safety standards based solely on that line. To confirm it "meets safety standards" for use at 350 bar with GZ 1/4" NPT, obtain manufacturer documentation: material grade and certificates, applicable standard compliance, pressure test records, recommended installation practices, and any certification for the GZ 1/4" NPT connection.

Nozzle for lances, steel stainless

All products, Guns for high-pressure washers/

Additional information

Nozzle for lances. Material: steel stainless. Connection: 1/4″ NPT male. Working pressure: up to 350 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-170289	Nozzle kal. 03 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170291	Nozzle kal. 04 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170293	Nozzle kal. 05 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170294	Nozzle kal. 055 with 1/4" NPT male, 0°	-	80	In stock	Enquiry
MH-170295	Nozzle kal. 06 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170296	Nozzle kal. 065 with 1/4" NPT male, 0°	-	210	In stock	Enquiry
MH-170297	Nozzle kal. 07 with 1/4" NPT male, 0°	-	100	In stock	Enquiry
MH-170299	Nozzle kal. 08 with 1/4" NPT male, 0°	-	140	In stock	Enquiry
MH-170301	Nozzle kal. 10 with 1/4" NPT male, 0°	-	100	In stock	Enquiry
MH-170308	Nozzle kal. 03 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170310	Nozzle kal. 04 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170311	Nozzle kal. 045 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170312	Nozzle kal. 05 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170313	Nozzle kal. 055 with 1/4" NPT male, 15°	-	80	In stock	Enquiry
MH-170314	Nozzle kal. 06 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170315	Nozzle kal. 065 with 1/4" NPT male, 15°	-	210	In stock	Enquiry
MH-170317	Nozzle kal. 07 with 1/4" NPT male, 15°	-	100	In stock	Enquiry
MH-170318	Nozzle kal. 075 with 1/4" NPT male, 15°	-	80	In stock	Enquiry
MH-170319	Nozzle kal. 08 with 1/4" NPT male, 15°	-	140	In stock	Enquiry
MH-170321	Nozzle kal. 10 with 1/4" NPT male, 15°	-	100	In stock	Enquiry
MH-170334	Nozzle kal. 03 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170336	Nozzle kal. 04 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170337	Nozzle kal. 045 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170338	Nozzle kal. 05 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170339	Nozzle kal. 055 with 1/4" NPT male, 25°	-	80	In stock	Enquiry
MH-170340	Nozzle kal. 06 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170341	Nozzle kal. 065 with 1/4" NPT male, 25°	-	210	In stock	Enquiry
MH-170342	Nozzle kal. 07 with 1/4" NPT male, 25°	-	100	In stock	Enquiry
MH-170344	Nozzle kal. 08 with 1/4" NPT male, 25°	-	140	In stock	Enquiry
MH-170346	Nozzle kal. 10 with 1/4" NPT male, 25°	-	100	In stock	Enquiry
MH-170352	Nozzle kal. 03 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170354	Nozzle kal. 04 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170355	Nozzle kal. 045 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170356	Nozzle kal. 05 with 1/4" NPT male, 40°	-	140	In stock	Enquiry
MH-170357	Nozzle kal. 055 with 1/4" NPT male, 40°	-	80	In stock	Enquiry
MH-170358	Nozzle kal. 06 with 1/4" NPT male, 40°	-	140	In stock	Enquiry
MH-170359	Nozzle kal. 065 with 1/4" NPT male, 40°	-	210	In stock	Enquiry
MH-170360	Nozzle kal. 07 with 1/4" NPT male, 40°	-	100	In stock	Enquiry
MH-170361	Nozzle kal. 075 with 1/4" NPT male, 40°	-	80	In stock	Enquiry
MH-170362	Nozzle kal. 08 with 1/4" NPT male, 40°	-	140	In stock	Enquiry
MH-170364	Nozzle kal. 10 with 1/4" NPT male, 40°	-	100	In stock	Enquiry