Is the Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6 rated for continuous use at 280 bar and 150Â°C?

Yes. The Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6 is rated for continuous operation up to the specified limits: working pressure up to 280 bar and operating temperature up to +150Â°C. These ratings are stated in the product description, and the lance is constructed of stainless steel with the listed connections (inlet GZ M22x1.5 / outlet GW 1/4" NPT) and a flow rate of 40 l/min. Ensure your system and all fittings, seals and accessories used with the lance are also rated for 280 bar and 150Â°C to maintain safe continuous use.

Can the Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6 handle 40 l/min flow at 280 bar and 150Â°C continuously?

Yes. Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6 is specified for a working pressure up to 280 bar, a flow rate of 40 l/min and an operating temperature up to +150Â°C. Based on those specifications, it can handle 40 l/min at 280 bar and 150Â°C continuously, assuming installation and system conditions match manufacturer recommendations (proper fittings, seals, and no additional transient loads).

Does the Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6 require specific seals for 150Â°C operation?

Lance for high-pressure cleaner, inlet GZ M22x1.5, stainless steel, type MT6: Yes. for operation at temperatures up to 150Â°C you must use seals rated for high temperature and compatible with both the cleaning fluid and stainless steel. Standard NBR (nitrile) seals typically degrade above ~100â120Â°C and are not suitable. Recommended options are high-temperature materials such as FKM/Viton (serviceable up to ~200Â°C depending on compound), EPDM (up to ~150Â°C for some grades but check chemical compatibility), or PTFE-based seals (excellent highâtemperature and chemical resistance). Additionally: - Choose seals sized for the GZ M22x1.5 inlet and able to withstand the working pressure (up to 280 bar). - Confirm chemical compatibility of the seal material with the cleaning media (solvents, detergents, hot water, steam). - If the design uses an O-ring in a dynamic or pressure-loaded gland, ensure correct hardness and cross-section to avoid extrusion at 280 bar; consider back-up rings. - For steam or very aggressive media, PTFE or specialized high-temperature elastomers are preferable. - Follow manufacturer recommendations for seal type and installation; when in doubt, request technical data sheets or consult the lance supplier. In summary: specific high-temperature and pressure-rated seals are required for safe, durable operation at 150Â°C and 280 bar. do not rely on standard NBR seals.

Lance for a high-pressure washer, inlet M22x1.5 male, steel stainless, type MT6

All products, Guns for high-pressure washers/

Additional information

A lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-140020	Lance MT6 500 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140022	Lance MT6 700 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140024	Lance MT6 900 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140026	Lance MT6 1200 mm, stainless steel, inlet M22x1.5 male	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.