Can the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 operate safely at 280 bar and 150Â°C with 40 l/min flow?

Yes. The Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 is rated for working pressure up to 280 bar, flow rate 40 l/min and operating temperature up to +150Â°C. Given those specifications, it can operate safely at 280 bar and 150Â°C with 40 l/min.provided installation and use follow manufacturer guidelines (proper connections, no damage or corrosion, correct seals, and compliance with periodic inspections and safety protocols). Any deviation from rated conditions, visible damage, or improper fittings may compromise safety.

Is the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 compatible with NPT outlet systems?

Yes. Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 has an outlet specified as GW 1/4" NPT, so it is compatible with NPT outlet systems on the outlet side. Note that its inlet is GZ 1/4" BSP (BSPP male), so to connect equipment expecting a BSP inlet no adapter is needed; to connect the lance inlet to an NPT male supply you would need the appropriate BSP-to-NPT adapter. Working pressure (up to 280 bar), flow (40 l/min) and temperature (+150Â°C) should also be matched when selecting adapters and fittings.

Does the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 require special seals for 40 l/min at 280 bar?

No, the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1 does not explicitly require special seals for operation at 40 l/min and 280 bar based on the provided description. The lance is specified for a working pressure up to 280 bar and a flow rate of 40 l/min, which means its design and materials (galvanized steel) are rated for those conditions. Standard seals compatible with high-pressure washer fittings and temperatures up to +150Â°C should be used. However, to ensure leak-free and safe operation, verify that: - Seals and thread sealant used are rated for 280 bar and for temperatures up to +150Â°C. - The inlet thread type (GZ 1/4" BSP) and outlet (GW 1/4" NPT) use appropriate seal types (e.g., PTFE tape, appropriate high-pressure O-rings or metal-to-metal sealing where specified). - Any retrofit or replacement seals match chemical compatibility with the cleaning fluid. If in doubt, consult the manufacturer or supplier for recommended seal materials and installation practice for the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT1.

Lance for a high-pressure washer, inlet 1/4″ BSP male, steel galvanized, type MT1

All products, Guns for high-pressure washers/

Additional information

A lance with thermal insulation, type MT1, intended for a high-pressure washer. Connections: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-140141	Lance 250 mm galvanized steel	-	280	In stock	Enquiry
MH-140142	Lance 500 mm galvanized steel	-	280	In stock	Enquiry
MH-140145	Lance 700 mm galvanized steel	-	280	In stock	Enquiry
MH-140146	Lance 900 mm galvanized steel	-	280	In stock	Enquiry
MH-140147	Lance 1200 mm galvanized steel	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A lance with thermal insulation, type MT1, intended for a high-pressure washer. Connections: (inlet) 1/4″ BSP male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.