Can M16x2 bulkhead measurement connection with metal plug, type 620.11 withstand 630 bar continuous working pressure at -20Â°C with a metal cap?

Yes . M16x2 bulkhead measurement connection with metal plug, type 620.11 can withstand 630 bar continuous working pressure at â20Â°C with a metal cap. Rationale: the product specification lists working pressure up to 630 bar depending on type, and the operating temperature range with metal cap is â30Â°C to +120Â°C. Sealing material is NBR and the body is steel with zinc-nickel coating; both are compatible with â20Â°C. Ensure you have the specific 620.11 variant rated to 630 bar (some variants are rated lower) and that installation/tightening follow the ISO 15171-2 / manufacturer instructions. If service conditions include aggressive media, thermal cycling, or mechanical loads, verify suitability with the manufacturer.

Can M16x2 bulkhead measurement connection with metal plug, type 620.11 be used with hydraulic systems having 37Â° JIC fittings?

Yes - M16x2 bulkhead measurement connection with metal plug, type 620.11 can be used with hydraulic systems having 37Â° JIC fittings. The connector provides an external JIC thread (7/16"-20 UNF, 37Â° cone) per ISO 15171-2 and is made of steel with zinc-nickel coating, rated for working pressures from 450 to 630 bar (type-dependent). Sealing is NBR and operating temperature range covers typical hydraulic applications (-30Â°C to +120Â°C; -30Â°C to +100Â°C with plastic cap). Ensure the specific typeâs pressure rating matches your system and that proper torque and sealing practice for 37Â° JIC connections are followed.

Is M16x2 bulkhead measurement connection with metal plug, type 620.11 compatible with fluids containing glycol-based additives?

M16x2 bulkhead measurement connection with metal plug, type 620.11 is likely compatible with fluids containing glycol-based additives, with the following considerations: - Materials and sealing: The body is steel with zinc-nickel coating and the sealing material is NBR (nitrile rubber). NBR generally shows good resistance to glycol-based antifreeze and many hydraulic fluids with glycol additives, especially at moderate temperatures and concentrations. However, NBR can be attacked by some glycol formulations containing aggressive additives or certain corrosion inhibitors. - Temperature limits: Operating temperature range is â30Â°C to +120Â°C (or â30Â°C to +100Â°C with plastic cap). Compatibility with glycol blends should be checked within this temperature window, noting that elevated temperatures can accelerate seal degradation. - Pressure and mechanical suitability: Working pressure (450â630 bar depending on type) and the robust metal construction make the fitting mechanically suitable for hydraulic systems containing glycol-based fluids. Recommendation: Verify the specific glycol formulation and additives with the seal manufacturer or supplier. If the fluid contains atypical additives, phosphate esters, or aggressive corrosion inhibitors, consider confirming chemical compatibility or selecting a different seal material (e.g., EPDM or FKM) if needed.

M16x2 bulkhead measurement connection with metal plug, type 620.11

All products, Measurement couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	50

Measurement connection M16x2 with metal cap. The connector has a standard according to ISO 15171-2, M16x2 thread on the measurement tip side, and an appropriate connection for hydraulic installation with external JIC thread (7/16″-20 UNF, 37° cone) or metric (M16x2). Material: steel with zinc-nickel coating. Working pressure: from 450 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with plastic cap).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-620-06-404-00	M16x2 measurement connector, grooved fitting GZ 7/16"-20 JIC, plastic cap	-	450	In stock	Enquiry
PS-620-06-404-06	M16x2 measurement connector, grooved fitting GZ 7/16"-20 JIC, metal plug	-	450	In stock	Enquiry
PS-620-11-000-70	M16x2 measurement connector, GZ M16x2 threaded fitting, plastic plug	-	630	In stock	Enquiry
PS-620-11-000-71	Measurement connector M16x2, threaded fitting GZ M16x2, metal plug	-	630	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Measurement connection M16x2 with metal cap. The connector has a standard according to ISO 15171-2, M16x2 thread on the measurement tip side, and an appropriate connection for hydraulic installation with external JIC thread (7/16″-20 UNF, 37° cone) or metric (M16x2). Material: steel with zinc-nickel coating. Working pressure: from 450 bar to 630 bar – depending on the type. Sealing: NBR. Operating temperature: from -30°C to +120°C (from -30°C to +100°C with plastic cap).